Office equipment — Print quality measurement methods for colour prints — Part 3: Physical durability measurement methods
Introduction: There is a need for the standardization of measurement methods that quantitatively evaluate the physical durability attributes of duplex print sets, as most office documents are currently printed as duplex print sets comprising several sheets printed with colour images on both sides of substrates. The measurement methods described in this document are used to assess the physical durability of a print set formed by a printing system on a substrate. When test results are compared among various printing systems, it is important to use the same product of substrates and to set the equivalent printing conditions under default printer settings among the printing systems. Electrophotography, thermal inkjet or piezoelectric inkjet technologies are commonly used to form such prints. The main purpose of this document is to provide objective measurement methods for physical durability attributes of duplex print sets, however, some attributes are also applicable for a set of simplex prints. This document specifies the following: — digital test charts for the measurements; — measurement methods for the following physical durability attributes: — thermal and humidity blocking caused by environmental stress; — water resistance; — abrasion resistance; — scratch resistance. The above attributes are also applicable for a simplex print set comprising several sheets which are printed colour images on one side of a substrate and no image on the other side. In such case, test parameters are config
Scope: This document specifies test methods as well as test charts for measuring the physical durability attributes of duplex colour prints, typically used in office environment. This document is applicable to duplex prints comprising several sheets with colour images printed on both sides of a substrate. A multifunction or single function printer is used to form the duplex prints. This document is intended to be used to evaluate the durability of colour prints under environment and stress conditions assuming general office use, including transportation from the place of printing to where practically used. Permanence and durability in archival and storage environments are out of scope of this document and can be evaluated by the methods in ISO 11798. The physical durability attributes included are thermal and humidity blocking, water resistance, abrasion resistance and scratch resistance. All of these attributes are also applicable to a simplex print set comprising several sheets with colour images printed on one side of a substrate and no image on the other side.