Information technology - MPEG video technologies - Part 4: Video tool library
Introduction: This document defines the MPEG video tool library, which contains tools drawn from existing MPEG coding standards, such as ISO/IEC 14496-2 and ISO/IEC 14496-10, and ISO/IEC 23001-4 defines the methods capable of describing codec configurations in the reconfigurable video coding (RVC) framework. This document primarily addresses reconfigurable video aspects and will only focus on the description of representation of video codec configurations under the RVC framework, but could be extended to a more generic reconfigurable media coding (RMC) framework. The objective of RVC is to offer a framework that is capable of configuring and specifying video codecs as a collection of “higher level” modules by using video coding tools. The video coding tools are defined in video tool libraries. This d defines the MPEG video tool library. The RVC framework principle could also support non-MPEG tool libraries, provided that their developers have taken care to obey the appropriate rules of operation. For the purpose of framework deployment, an appropriate description is needed to describe configurations of decoders composed of or instantiated from a subset of video tools from either one or more libraries. As illustrated in Figure 1, the configuration information consists of — bitstream syntax description, and — network of functional units (FUs) description (also referred to as the decoder configuration) that together constitute the entire decoder description. Bitstreams of existing MPEG standa
Scope: This document defines the description of the MPEG video tool library (VTL) based on the decoder description specified in ISO/IEC 23001-4. This tool library defines the specification of FUs, which are sufficient to build complete decoding solutions according to the following coding standards: ISO/IEC 14496-2 (MPEG-4 Simple Profile), ISO/IEC 14496-10 (MPEG-4 AVC Constrained Baseline Profile and Progressive High Profile), ISO/IEC 14496-16 (MPEG-4 SC3DMC), and ISO/IEC 23008-2 (HEVC Main Profile). The objective of ISO/IEC 23001-4 is to define the general framework principles, and this document defines the MPEG VTL that includes relevant tools (or FUs) from the existing MPEG coding standards. Each FU is defined in the form of a textual description, which can be found in 4.1. The input and output behaviour follows the conventions described in Clause 5, Clause 6, and Clause 7. This document compliant implementations can be designed using any software or hardware language and components. The reference software for the textual specification of FUs is written in RVC-CAL language of which a formal syntax is provided in ISO/IEC 23001-4.
Contents:
- Foreword
- Introduction
- Scope
- 5.2.10 Algo_ED_AD_EG
- 5.2.11 Algo_ED_4bitsD
- 5.2.12 Algo_ED_FixedLength
- 5.2.13 Algo_LookUpTable1D
- 5.2.14 Algo_ContextModeling
- 5.2.15 Algo_simpleMath_2op
- 5.2.16 Mgnt_Replicate_1_2
- 5.2.17 Mgnt_Replicate_1_4
- 5.2.18 Mgnt_Replicate_1_8
- 5.2.19 Mgnt_MUX_2_1
- 5.2.20 Mgnt_MUX_4_1
- 5.2.21 Mgnt_MUX_8_1
- 5.2.22 Mgnt_DEMUX_1_2
- 5.2.23 Mgnt_DEMUX_1_4
- 5.2.24 Mgnt_DEMUX_1_8
- 5.2.25 Mgnt_ExtractSegment
- 5.2.26 Mgnt_ProviderValue
- 5.2.27 Mgnt_RepeatSegment
- 5.2.28 Mgnt_ExtractBytes
- 5.2.29 Mgnt_ExtractBits