Information technology — Digitally recorded media for information interchange and storage — 120 mm Single Layer (25,0 Gbytes per disk) and Dual Layer (50,0 Gbytes per disk) BD Rewritable disk
Introduction: In March 2002, the Blu-ray Disc Founders, or BDF, came together to create optical disk formats with the large capacity and high-speed transfer rates that would be needed for recording and reproducing of high-definition video content. The first edition of Blu-ray DiscTM Rewritable Format Part 1 Version 1.0 was issued in June 2002 (capacity 23 GB with catridge). The BDA issued Version 2.1 of the Blu-ray Disc™ Rewritable Format Part1 in October 2005 and Version 3.0 in June of 2010 (capacity 25 GB and 50 GB without cartridge). To keep the compatibility of the removable medium in the market, just to make a standard is not enough, and it is necessary to check that the disks and devices can satisfy the specifications. The BDA conducts verification activities for both disks and devices and has established more than 10 testing Centres in Asia, Europe and the USA. Blu-rayTM disks, players, recorders and PC drives/software based on BDA standards became popular all over the world. The BDA gave consumer applications the highest priority in the first few years. But it was known, of course, that international standardization would be required before many government entities and their contractors would be allowed to use Blu-ray Disc™. In January and February 2011, the BDA was formally requested to consider international standardization. The reason for this was to enable the inclusion of writable BDs, along with DVDs and CDs, in an International Standard specifying test methods for the estima
Scope: This document specifies the mechanical, physical and optical characteristics of a 120 mm rewritable optical disk with a capacity of 25,0 Gbytes or 50,0 Gbytes. It specifies the quality of the recorded and unrecorded signals, the format of the data and the recording method, thereby allowing for information interchange by means of such disks. User data can be written, read and overwritten many times using a reversible method. This disk is identified as a BD rewritable disk. This document specifies the following: — two related but different types of this disk; — conditions for conformance; — environments in which the disk is to be operated and stored; — mechanical and physical characteristics of the disk, which allow mechanical interchange between data processing systems; — format of the information on the disk, including the physical disposition of the tracks and sectors; — error-correcting codes and coding method used; — characteristics of the signals recorded on the disk, which enable data processing systems to read data from the disk. This document provides for interchange of disks between drives. Together with a standard for volume and file structure, it provides for full data interchange between data processing systems.