ISO/IEC 80079-38-2026 PDF

ISO/IEC 80079-38-2026 PDF

Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines

$129.00 $258.00 -50%
Product Code: ISO/IEC 80079-38
Stock In Stock
Edition: 2.
Published: 09/2026
Number of Pages: 44
File Size: 1 file, 700 KB

Available Options

Product Description

Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines

Introduction: This part of ISO/IEC 80079 specifies requirements for the constructional features of Ex Equipment and Ex Components that can be an individual item or form an assembly, to enable them to be used in mines, or parts of mines, susceptible to explosive atmospheres of firedamp, combustible dust or a combination of the two. Most of the Ex Equipment used on mining machinery complies with the Type of Protection standards as an individual item of equipment, for example motors and switchgear, and they have their own marking requirements. The Type of Protection standards, however, do not deal with the interconnection of Ex Equipment and Ex Components. Both non-electrical Ex Equipment and the interconnection of electrical/non-electrical Ex Equipment can require an ignition hazard assessment. The need for this document arises because of major operational differences between underground mining operations and those in other industries working with, or in, explosive atmospheres. Examples of these differences are: firedamp can be released during the extraction of coal or other mining where firedamp is trapped; the ignitability of the atmosphere around Ex Equipment and Ex Components usually depends upon the amount of dilution offered by an active ventilating system; the atmosphere in the general body of mine air in which machinery is working can change from one that is not explosive to one that is explosive (for example, during an outburst of firedamp) and, depending on the likelihood, this can

Scope: This part of ISO/IEC 80079 is applicable for the explosion protection requirements for the construction, testing and marking for Group I Ex Equipment that can be an individual item, or be an assembly of multiple items of Ex Equipment and Ex Components forming mining machinery. NOTE 1 The Group I designation takes account of the fact coal dust (which is a combustible dust) is expected to be present, with or without the presence of firedamp, which is predominately methane. NOTE 2 The definition of Group I also covers mines other than coal mines that are susceptible to firedamp. NOTE 3 The term "assembly" as used in this document is not identical in meaning to the term "Equipment Assembly" as defined in IEC 60079-46. The standard atmospheric conditions (relating to the explosion characteristics of the atmosphere) under which it can be assumed that Ex Equipment can be operated are: temperature −20 °C to +60 °C; pressure 80 kPa (0,8 bar) to 110 kPa (1,1 bar); and air with normal oxygen content, typically a volume fraction of 21 %. This part of ISO/IEC 80079 applies for Ex Equipment and Ex Components with Explosion Protection Levels (EPLs) Ma and Mb. This document supplements and modifies the general requirements of IEC 60079-0. Where a requirement of this document conflicts with a requirement of IEC 60079-0, the requirement of this document takes precedence. This document can be used for guidance on underground applications where firedamp or coal dust can be present, but which are not Group I mines, for example tunnels.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO/IEC 80079-38-2026 PDF

ISO/IEC 80079-38-2026 PDF

$129.00 $258.00