ISO/IEC TR 11801-9902-2017 PDF

ISO/IEC TR 11801-9902-2017 PDF

Information technology-Generic cabling for customer premises-Part 9902: End-to-end link configurations

$96.50 $193.00 -50%
Product Code: ISO/IEC TR 11801-9902
Stock In Stock
Edition: 1ST
Published: 06/2017
Number of Pages: 32
File Size: 1 file, 786 Bytes

Available Options

Product Description

Information technology – Generic cabling for customer premises – Part 9902: End-to-end link configurations

Introduction: One major difference between a standard generic cabling installation and an industrial cabling as also other application areas of cabling is how it is installed. In these areas it is common practice to deploy cabling channels constructed from one or more cords as described in Annex B and Annex C of ISO/IEC 11801-3:—1. In addition, the cords are field terminated rather than pre-terminated into plugs elsewhere. As a result, these cords might have problems associated with the termination process which are not identified during channel verification testing in accordance with ISO/IEC 11801-1 since such testing excludes the free connectors at the end of the channel. This Technical Report provides definitions for, and examples of, such cabling implementations, described as end-to-end (E2E) links. It also provides performance specifications to support Class D and Class E balanced cabling channels of ISO/IEC 11801-1 which include the impact of the terminating connectors that may be used for performance verification using the test method of ISO/IEC 14763-4. ___________ 1 Under preparation. Stage at the time of publication: ISO/IEC FDIS 11801-3:2017.

Scope: This part of ISO/IEC 11801, which is a Technical Report, provides definitions for, and examples of, cabling implementations described as end-to-end (E2E) links. In addition, this document provides performance specifications to support Class D and Class E balanced cabling channels of ISO/IEC 11801-1. These specifications amend those channel specifications of ISO/IEC 11801-1 by including the impact of the free connectors in accordance with the interfaces specified in ISO/IEC 11801-3 used to terminate the E2E link. Test methods are provided in ISO/IEC 14763-4. End-to-end link configurations can include any type of connection.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO/IEC TR 11801-9902-2017 PDF

ISO/IEC TR 11801-9902-2017 PDF

$96.50 $193.00