ISO/IEC TR 11801-9911-2024 PDF

ISO/IEC TR 11801-9911-2024 PDF

Information technology-Generic cabling for customer premises-Part 9911: Guidelines for the use of balanced single pair applications within a balanced 4-pair cabling system

$96.50 $193.00 -50%
Product Code: ISO/IEC TR 11801-9911
Stock In Stock
Edition: 1.
Published: 11/2024
Number of Pages: 24
File Size: 1 file, 1 Byte

Available Options

Product Description

Information technology – Generic cabling for customer premises – Part 9911: Guidelines for the use of balanced single pair applications within a balanced 4-pair cabling system

Introduction: The ISO/IEC 11801 series is currently being revised to cover “balanced single pair cabling systems”, which will expand the range of use for structured cabling systems. With the capability of delivering data and power, these systems are ideally suited for incorporating Internet of Things (IoT) devices into premises cabling systems. Single pair applications are increasingly important for all operators of automation networks in buildings and industrial areas. Implementing these new single pair cabling structures provides for application of device-level diagnostics and security and provides for improved system scalability. Single pair cabling is not meant to replace traditional 4-pair cabling, but to support emerging applications, such as interconnecting IoT and M2M (machine-to-machine) devices. This document gives guidance and instructions for the use of balanced single pair cabling as specified in ISO/IEC 11801-1:2017/AMD1:- [1]1 and 4-pair components specified in ISO/IEC 11801-1:2017 [2] together in the same balanced cabling system assuring application support in accordance with ISO/IEC 11801-6 [3]. ___________ 1 Under preparation. Stage at the time of publication: ISO/IEC CD 11801-1:2017/AMD1:2023.

Scope: This part of ISO/IEC 11801, which is a Technical Report, a) describes the rules of implementation of balanced single pair cabling as specified by ISO/IEC 11801-6 [3] within a balanced 4-pair cabling system with a current carrying capacity of 0,75 A per conductor as specified in ISO/IEC 11801-1:2017 [2]; b) describes the use of ISO/IEC 11801-1:2017 [2] components and cabling to implement and configure in accordance with ISO/IEC 11801-3:2017/AMD1:2021 [4], ISO/IEC 11801-4 [5] and ISO/IEC 11801-6 [3]; c) describes links and components for generic single pair channels in accordance with ISO/IEC 11801-1:2017/AMD1:- [1]. Particular areas of interest are 1) remote powering in accordance with IEEE Std 802.3dd [6], 2) loop resistance and maximum current, 3) insertion loss, 4) return loss, 5) noise considerations, 6) frequency range requirements (low and high), 7) length calculation of the SCP link 4-pair-cable, and 8) number of channels; d) describes the use of application-specific single pair channels in addition to ISO/IEC 11801- 1:2017/AMD1:- [1], 6.6.4; e) describes guidance on single pair remote powering applications when using 4-pair cabling with current carrying capacity specified by ISO/IEC 11801-1:2017 [2]; f) describes guidelines for planning, administration and installation. NOTE This document compares requirements of existing 4-pair cabling classes and single-pair classes. The described approach can be adjusted to any number of pairs.

Contents:

  • FOREWORD
  • INTRODUCTION
  • Scope

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO/IEC TR 11801-9911-2024 PDF

ISO/IEC TR 11801-9911-2024 PDF

$96.50 $193.00