Information technology - High efficiency coding and media delivery in heterogeneous environments - Part 14: Conversion and coding practices for HDR/WCG Y′CbCr 4:2:0 video with PQ transfer characteristics
Introduction: High dynamic range (HDR) video is a type of video content in which the sample values span a larger luminance range than conventional standard dynamic range (SDR) video. HDR video can provide an enhanced viewer experience and can more accurately reproduce scenes that include, within the same image, dark areas and bright highlights, such as emissive light sources and reflections. On the other hand, wide colour gamut (WCG) video is video characterized by a wider spectrum of colours compared to what has been commonly available in conventional video. Recent advances in capture and display technology have enabled consumer distribution of HDR and WCG content. However, given the characteristics of such content, special considerations may need to be made, in terms of both processing and compression, compared to conventional content. This document provides a set of recommended guidelines on processing of consumer distribution HDR/WCG video. This includes recommendations for converting a video signal, in a linear light RGB representation with Rec. ITU-R BT.2020 colour primaries, to a 10-bit, narrow range, PQ encoded (as defined in SMPTE ST 2084 and Rec. ITU-R BT.2100), 4:2:0, non-constant luminance Y′CbCr representation. These guidelines may also apply to other representations with higher bit depth or other colour formats, such as 4:4:4 Y′CbCr 12 bit video. The scope of this document is illustrated in Figure 1. Out of scope In scope Out of scope Content preparation Pre- encoding process
Scope: This document provides guidance on the processing of high dynamic range (HDR) and wide colour gamut (WCG) video content. The purpose of this document is to provide a set of publicly referenceable recommended guidelines for the operation of AVC or HEVC video coding systems adapted for compressing HDR/WCG video for consumer distribution applications. This document includes a description of processing steps for converting from 4:4:4 RGB linear light representation video signals into non-constant luminance (NCL) Y′CbCr video signals that use the perceptual quantizer (PQ) transfer function defined in SMPTE ST 2084 and Rec. ITU-R BT.2100. Although the focus of this document is primarily on 4:2:0 Y′CbCr 10 bit representations, these guidelines are also applicable to other representations with higher bit depth or other colour formats, such as 4:4:4 Y′CbCr 12 bit video. In addition, this document provides some high-level recommendations for compressing these signals using either the AVC or HEVC video coding standards. A description of post-decoding processing steps is also included for converting these NCL Y′CbCr signals back to a linear light, 4:4:4 RGB representation.