Information security, cybersecurity and privacy protection — Hardware monitoring technology for hardware security assessment
Introduction: Hardware components and the computing ecosystem are becoming increasingly complex. As a result, it becomes increasingly difficult to evaluate the security of hardware. Even in the design stage, it is quite difficult to identify abnormal parts that can cause flaws from among millions of source code lines or billions of transistors, as well as the physical connections between them. Other areas of technology use monitoring to assist with the evaluation aiming to mitigate such difficulties. In those technologies, runtime activities such as changes in internal or external status can be monitored to identify deviations from normal behaviour patterns, and by these means, the evaluation can focus on a small set of patterns that the monitored subject typically works with. This method now becomes an available option to assist in hardware security assessment. In such cases, either the target of security assessment is supposed to be “runtime hardware- behaviour-based security”, or introduced as a proactive approach to security. Many evaluation and assessment standards, such as ISO/IEC TS 30104, ISO/IEC 19790 and ISO/IEC 17825, focus on physical security (invasive/nonintrusive) at the hardware boundary. However, they do not focus on the monitoring data, either offline or in real time. © ISO/IEC 2024 – All rights reserved
Scope: This document surveys and summarizes the existing hardware monitoring methods, including research efforts and industrial applications. The explored monitoring technologies are classified by applied area, carrier type, target entity, objective pattern, and method of deployment. Moreover, this document summarizes the possible ways of utilizing monitoring technologies for hardware security assessment with some existing state-of-the-art security assessment approaches. The hardware mentioned in this document refers only to the core processing hardware, such as the central processing unit (CPU), microcontroller unit (MCU), and system on a chip (SoC), in the von Neumann system and does not include single-input or single-output devices such as memory or displays. The hardware monitoring technology discussed in this document has the following considerations and restrictions: — the monitored target is for the post-silicon phase, not for the design-house phase (e.g. an RTL or netlist design); — monitoring is only applied to the runtime system.