ISO 10304-4-2022 PDF

ISO 10304-4-2022 PDF

Water quality-Determination of dissolved anions by liquid chromatography of ions-Part 4: Determination of chlorate, chloride and chlorite in water with low contamination

$71.50 $143.00 -50%
Product Code: ISO 10304-4
Stock In Stock
Edition: 2ND
Published: 03/2022
Number of Pages: 20
File Size: 1 file, 1 Byte

Available Options

Product Description

Water quality — Determination of dissolved anions by liquid chromatography of ions — Part 4: Determination of chlorate, chloride and chlorite in water with low contamination

Scope: This document specifies a method for the determination of the dissolved anions chlorate, chloride and chlorite in water with low contamination (e.g. drinking water, raw water or swimming pool water). The diversity of the appropriate and suitable assemblies and the procedural steps depending on them permit a general description only. For further information on the analytical technique, see Bibliography. An appropriate pre-treatment of the sample (e.g. dilution) and the use of a conductivity detector (CD), UV detector (UV) or amperometric detector (AD) make the working ranges given in Table 1 feasible. Table 1 — Working ranges of the analytical method Anion Working range mg/la Detection Chlorate 0,03 to 10 Chloride 0,1 to 50 Chloriteb 0,05 to 1 0,1 to 1 UV; λ = 207 nm to 220 nm 0,01 to 1 AD; 0,4 V to 1,0 V The working range is restricted by the ion-exchange capacity of the columns. If necessary, samples can be adjusted to this range by dilution. The minimum working range for chlorite of 0,05 mg/l was obtained using calibration checks, but the interlaboratory trials (see Table A.4) showed that it is difficult to obtain this with sufficient accuracy, and only if taking great care.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 10304-4-2022 PDF

ISO 10304-4-2022 PDF

$71.50 $143.00