ISO 10360-13-2021 PDF

ISO 10360-13-2021 PDF

Geometrical product specifications (GPS)-Acceptance and reverification tests for coordinate measuring systems (CMS)-Part 13: Optical 3D CMS

$145.50 $291.00 -50%
Product Code: ISO 10360-13
Stock In Stock
Edition: 1ST
Published: 09/2021
Number of Pages: 62
File Size: 1 file, 5 Bytes

Available Options

Product Description

Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 13: Optical 3D CMS

Introduction: This document is a geometrical product specification (GPS) standard and is to be regarded as a general GPS standard (see ISO 14638). It influences chain link F of the chain of standards on size, distance, form, orientation, location and run-out in the general GPS matrix (see Annex H). The ISO GPS matrix model given in ISO 14638 gives an overview of the ISO GPS system, of which this document is a part. The fundamental rules of ISO GPS given in ISO 8015 apply to this document and the default decision rules given in ISO 14253-1 apply to specifications made in accordance with this document, unless otherwise indicated. This document has two technical objectives: 1) to test the error of indication when measuring a calibrated test length across the global measuring volume of the CMS; 2) to test the errors of indication within a locally intended measuring volume. These two objectives correspond to: a) the test performed for a probing system and a moving carrier of the probing system in combination as described in ISO 10360-2, ISO 10360-7, ISO 10360-8, ISO 10360-10, ISO 10360-111) and ISO 10360-12; b) the test performed dominantly for the probing system as described in ISO 10360-5, ISO 10360-7, ISO 10360-8, ISO 10360-9, ISO 10360-10, ISO 10360-11 and ISO 10360-12. The benefits of these tests are that the measured result has a direct traceability to the unit of length, the metre, and that it gives information on how the coordinate measuring machine (CMM) or the coordinate measuring sys

Scope: This document specifies the acceptance tests for verifying the performance of an optical 3D coordinate measuring system (CMS) when measuring lengths as stated by the manufacturer. It also specifies the reverification tests that enable the user to periodically reverify the performance of the optical 3D CMS. This document is applicable to verification of the measuring performance of CMSs if the surface characteristics (e.g. glossiness, colour) of the object to be scanned are restricted and within a cooperative range. This document does not apply to other types of CMSs, including those covered by the other parts of the ISO 10360 series.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 10360-13-2021 PDF

ISO 10360-13-2021 PDF

$145.50 $291.00