ISO 10813-1-2023 PDF

ISO 10813-1-2023 PDF

Vibration generating machines-Guidance for selection-Part 1: Equipment for environmental testing

$113.50 $227.00 -50%
Product Code: ISO 10813-1
Stock In Stock
Edition: 2.
Published: 08/2023
Number of Pages: 38
File Size: 1 file, 1 Byte

Available Options

Product Description

Vibration generating machines — Guidance for selection — Part 1: Equipment for environmental testing

Introduction: To select a suitable vibration generating system is an urgent problem if it is necessary for a certain test to purchase new test equipment or to update the equipment already available, or to choose between equipment proposed by a test laboratory or even a laboratory itself which offers its service to carry out such a test. A problem like this can be resolved acceptably if a number of factors are considered simultaneously, as follows: — the type of the test to be carried out (environmental testing, normal and/or accelerated, dynamic structural testing, diagnosis, calibration, etc.); — the requirements to be followed; — the test conditions (one mode of vibration or combined vibration, single vibration test or combined test, for example, dynamic plus climatic); — the objects to be tested. This document deals only with equipment to be used during environmental testing, and those selection procedures that are predominantly to meet the requirements of this test. However, the user should keep in mind that a specific test condition and a specific object to be tested can significantly influence the selection. Thus, to excite a specimen inside a climatic chamber imposes limitations on the vibration generator interface, and a specimen of a large size and/or of a complex shape, having numerous resonances in all directions, demands larger equipment than that specified for the procedures of this document, assuming that excitation is to be applied to the rigid body of the same mass. Unfortu

Scope: This document gives guidance for the selection of vibration generating equipment used for vibration environmental testing, depending on the test requirements. This guidance covers such aspects of selection as — the equipment type, — the model, and — some main components, excluding the control system. NOTE 1 Some examples are given in Annex A. NOTE 2 This document is primarily focused on determining functional specifications for equipment based on the requirements of a specific environmental test. More practical aspects of the selection (including target test definition and fixturing considerations) are covered in IEST-RP-DTE009.1[1].

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 10813-1-2023 PDF

ISO 10813-1-2023 PDF

$113.50 $227.00