ISO 10865-2-2015 PDF

ISO 10865-2-2015 PDF

Wheelchair containment and occupant retention systems for accessible transport vehicles designed for use by both sitting and standing passengers - Part 2: Systems for forward-facing wheelchair-seated passengers

$113.50 $227.00 -50%
Product Code: ISO 10865-2
Stock In Stock
Edition: 1ST
Published: 09/15/2015
Number of Pages: 40
File Size: 1 file, 1 Byte

Available Options

Product Description

Wheelchair containment and occupant retention systems for accessible transport vehicles designed for use by both sitting and standing passengers - Part 2: Systems for forward-facing wheelchair-seated passengers

Introduction: Providing safe transportation for wheelchair-seated passengers of motor vehicles usually requires installation of aftermarket equipment to secure the wheelchair and provide passenger restraint during emergency vehicle manoeuvres and crash conditions that are appropriate to the size and travel conditions of the vehicle. ISO 10542-1 establishes design and performance requirements and associated test methods for wheelchair tiedown and occupant restraint systems (WTORS) intended for use by wheelchair-seated passengers in all types of motor vehicles that have been modified for use by people seated in wheelchairs. The provisions of ISO 10542-1 were based on the belief that WTORS manufacturers are not able to control the types of vehicles and travel modes in which most of their products are installed and used. ISO 10542-1 therefore requires frontal sled-impact testing of WTORS to nominally worst- case crash conditions of smaller vehicles, such as full-size vans and minivans, using a simulated crash acceleration/deceleration pulse that results in a change in sled speed (delta V) of 48 km/h. While this one-size-fits-all approach to WTORS, crashworthiness testing is appropriate for equipment intended for general use in all types of motor vehicles, it generally leads to products that are over designed for larger and heavier vehicles used primarily in low-speed intra-city transportation. This is particularly the case for accessible transit vehicles in which passengers are allowed to trav

Scope: This part of ISO 10865 applies to wheelchair passenger spaces that are intended for use by passengers with a body mass greater than 22 kg who remain in their wheelchairs when travelling facing forward in accessible transport vehicles designed to transport both standing and sitting passengers on fixed- route service. It assumes that the maximum acceleration imparted to the vehicle during emergency driving manoeuvres will not exceed 1 g in any direction and rarely exceeds 3 g in frontal crashes. For the purposes of this part of ISO 10865, the term wheelchair includes manual and powered wheelchairs, and three and four wheeled scooters. This part of ISO 10865 specifies performance requirements and associated test methods, design requirements, requirements for manufacturer instructions and warnings to installers, wheelchair users, and vehicle operators, and requirements for product labelling and disclosure of test information. The provisions of this part of ISO 10865 apply primarily to a complete forward-facing wheelchair passenger space (FF-WPS), but subsets of the provisions can be applied to components and subassemblies sold separately, as appropriate to the specific functions of the components and/or subassemblies they are intended to replace.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 10865-2-2015 PDF

ISO 10865-2-2015 PDF

$113.50 $227.00