ISO 10882-2-2024 PDF

ISO 10882-2-2024 PDF

Health and safety in welding and allied processes-Sampling of airborne particles and gases in the operator's breathing zone-Part 2: Sampling of gases

$60.00 $120.00 -50%
Product Code: ISO 10882-2
Stock In Stock
Edition: 2.
Published: 04/2024
Number of Pages: 30
File Size: 1 file, 1 Byte

Available Options

Product Description

Hygiène et sécurité en soudage et techniques connexes - Échantillonnage de particules en suspension et gaz dans la zone respiratoire des opérateurs - Partie 2: Échantillonnage des gaz

Introduction: Gases encountered during welding and allied processes are so numerous that it would be impracticable to cover them all in this document. Depending on the process, they can include: a) fuel gases which are used in gas welding and cutting, which on combustion produce carbon dioxide and, in some instances, carbon monoxide; b) shielding gases, such as argon, helium, carbon dioxide or mixtures of these gases, which can be toxic or asphyxiant; c) gases produced by the action of heat upon the welding flux or slag, e.g. carbon dioxide and carbon monoxide; d) gases produced by the action of heat or ultraviolet radiation upon the atmosphere surrounding the welding arc, e.g. nitric oxide, nitrogen dioxide and ozone; e) vapours produced as a result of thermal degradation of surface coatings in the welding or cutting of metals treated with paint, primer, sealer or other substances. Vapours can also be produced as a result of degradation of solvent vapour from degreasing operations, but their measurement is not dealt with in this document because good working practices will avoid their production. The scope of this document has been limited to those gases which are produced by welding operations. In particular, fuel, oxidant and shielding gases used in welding and allied processes are not covered, since the hazards associated with their use (e.g. asphyxiation, explosion) are different from those arising from the gases dealt with in this document. This document gives a generalised descripti

Scope: This document provides guidance and specifications for the determination of personal exposure to gases and vapours in welding and allied processes. It applies to the following thermal processes used to join, cut, surface or remove metals: (111) Manual metal arc welding (metal arc welding with covered electrode); shielded metal arc welding /USA/ (114) Self-shielded tubular-cored arc welding (131) Metal inert gas welding; MIG welding; gas metal arc welding /USA/ (135) Metal active gas welding; MAG welding; gas metal arc welding /USA/ (136) Tubular-cored metal arc welding with active gas shield; flux cored arc welding /USA/ (137) Tubular-cored metal arc welding with inert gas shield; flux cored arc welding /USA/ (141) Tungsten inert gas arc welding; TIG welding; gas tungsten arc welding /USA/ (15) Plasma arc welding; (31) Oxy-fuel gas welding; oxy-fuel gas welding /USA/ (52) Laser beam welding; (912) Flame brazing; torch brazing /USA/ (97) Braze welding; — arc and flame gouging; — arc and laser cutting processes; — flame and plasma cutting processes; — metal-spraying (see ISO 4063). The following gases and vapours which can be produced or be present during welding and allied processes are covered: — ozone (O3); — carbon monoxide (CO); — carbon dioxide (CO2); — nitric oxide (NO) and nitrogen dioxide (NO2); © ISO 2024 – All rights reserved ISO 10882-2:2024(en) — vapours produced in the welding or cutting of metals having paint or other surface coatings. Fuel, oxidant and shielding gases used in welding and allied processes are not covered. The general background level of gases and vapours in the workplace atmosphere influences personal exposure, and therefore the role of fixed-point measurements is also considered. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 10882-1:2024, Health and safety in welding and allied processes — Sampling of airborne particles and gases in the operator's breat

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 10882-2-2024 PDF

ISO 10882-2-2024 PDF

$60.00 $120.00