Tracteurs et matériels agricoles - Systèmes d'autoguidage pour tracteurs commandés par opérateur et pour machines automotrices - Exigences de sécurité
Introduction: This document is a type-C standard as stated in ISO 12100. This document is of relevance, in particular, for the following stakeholder groups representing the market players with regard to machinery safety: — machine manufacturers (small, medium and large enterprises); — health and safety bodies (regulators, accident prevention organisations, market surveillance, etc.). Others can be affected by the level of machinery safety achieved with the means of the document by the above-mentioned stakeholder groups: — machine users/employers (small, medium and large enterprises); — machine users/employees (e.g. trade unions, organizations for people with special needs); — service providers, e.g. for maintenance (small, medium and large enterprises); — consumers (in case of machinery intended for use by consumers). The above-mentioned stakeholder groups have been given the possibility to participate at the drafting process of this document. In addition, this document is intended for standardization bodies elaborating type-C standards. The requirements of this document can be supplemented or modified by a type-C standard. For machines which are covered by the scope of a type-C standard and which have been designed and built according to the requirements of that standard, the requirements of that type-C standard take precedence. The structure of safety standards in the field of machinery is as follows: — Type-A standards (basis standards) give basic concepts, principles for design, and ge
Scope: This document specifies safety requirements for auto-guidance systems used in agricultural tractors and self-propelled agricultural machines. It is applicable to auto-guidance systems which are factory installed as an integral part of the tractor or self-propelled machine, as well as systems designed to be retrofitted to equipment after such equipment has left the control of the manufacturer. It is not applicable to guidance systems used in tractors or self-propelled machines that do not require an on-board operator for primary control of the tractor or self-propelled machine. This document does not specify requirements necessary to ensure the integrity of the complex electronic control system which can be an integral part of the auto-guidance system. Such requirements are dealt with in other International Standards which address complex electrical/electronic machine control systems. This document is not applicable to tractors and self-propelled machines which were manufactured with an auto-guidance system, and to self-contained auto-guidance retrofit systems, which were individually placed on the market before the date of publication of this document. NOTE Specific road traffic regulations can impose additional requirements for auto-guidance systems.