ISO 1110-2019 PDF

ISO 1110-2019 PDF

Plastics-Polyamides-Accelerated conditioning of test specimens

$60.00 $120.00 -50%
Product Code: ISO 1110
Stock In Stock
Edition: 4TH
Published: 05/2019
Number of Pages: 10
File Size: 1 file, 1 Byte

Available Options

Product Description

Plastics - Polyamides - Accelerated Conditioning of Test Specimens

Introduction: Various properties of polyamides (PA) depend upon their moisture content. Reproducible values of these properties can only be obtained with specimens having a specified moisture content. Such specimens are obtained by conditioning, i.e. by allowing them to reach equilibrium in an atmosphere with a specified temperature and relative humidity. The rate of moisture absorption and, therefore, the rate of conditioning, is a function of the temperature. This rate is very low at room temperature. For example, a 4 mm thick test specimen of PA66 requires more than a year to attain its equilibrium moisture content in standard atmosphere 23/50 (see ISO 291). A higher temperature is used when conditioning specimens in a short period of time. Such a method for accelerated conditioning is presented in this document. © ISO 2019 – All rights reserved

Scope: This document describes a method for the accelerated conditioning of test specimens of polyamides and copolyamides. It is applicable to grades containing fillers and other additives, but not grades containing more than a mass fraction of 2 % extractables. The equilibrium moisture content attained by this method is close to the equilibrium moisture content obtained in standard atmosphere 23 °C/50 %RH. The values of mechanical properties obtained after accelerated conditioning in accordance with this method can differ slightly from those obtained after conditioning in standard atmosphere 23 °C/50 %RH.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 1110-2019 PDF

ISO 1110-2019 PDF

$60.00 $120.00