ISO 11127-7-2022 PDF

ISO 11127-7-2022 PDF

Preparation of steel substrates before application of paints and related products-Test methods for non-metallic blast-cleaning abrasives-Part 7: Determination of water-soluble chlorides

$31.50 $63.00 -50%
Product Code: ISO 11127-7
Stock In Stock
Edition: 3.
Published: 11/2022
Number of Pages: 14
File Size: 1 file, 940 Bytes

Available Options

Product Description

Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 7: Determination of water-soluble chlorides

Introduction: Amperometric titration against silver nitrate has been the established method of determining water- soluble chlorides in non-metallic abrasives since the first edition of this document. Subsequently, other methods of analysis offering faster and more sensitive determinations, namely ion chromatography and spectrophotometry, have gained popularity. This document specifies three methods of analysis for water-soluble chlorides. The spectrophotometric determination of water-soluble chloride relies on the dissociation of mercuric thiocyanate by chloride ions. In the presence of ferric ion, the liberated thiocyanate ion forms the dark red coloured ferric thiocyanate complex in a concentration which is proportional to the original chloride ion concentration. The concentration of the ferric thiocyanate is determined by measuring the absorbance at 450 nm. This method can be used to determine chloride concentrations as low as 0,1 mg/l. Commercially available reagent kits offer determinations in the ranges 0,1 mg/l to 25 mg/l and 1 mg/l to 70 mg/l. Portable spectrophotometers allow the adoption of this method as field method of determination of water-soluble chloride. This method has also been adapted for flow injection analysis. The determination of chloride by ion chromatograph separates the chloride from other water-soluble anions by liquid chromatography, applying an anion exchange resin as stationary phase, and aqueous solutions of carbonate, hydrogencarbonate, hydroxide as eluent.

Scope: This document specifies three methods for the determination of water-soluble chlorides in non-metallic blast-cleaning abrasives, namely, amperometric titration, spectro-photometry and ion chromatography. This document is part of the ISO 11127 series dealing with the sampling and testing of non-metallic abrasives for blast-cleaning. The types of non-metallic abrasive and requirements on each are contained in the ISO 11126 series. The ISO 11126 series and the ISO 11127 series have been drafted as a coherent set of International Standards on non-metallic blast-cleaning abrasives.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 11127-7-2022 PDF

ISO 11127-7-2022 PDF

$31.50 $63.00