Workplace Air - Determination of Particulate Cadmium and Cadmium Compounds - Flame and Electrothermal Atomic Absorption Spectrometric Method
Introduction: The health of workers in many industries, such as mining, metal refining, battery manufacture, foundries, electronics and construction, is at risk through exposure by inhalation of particulate cadmium and cadmium compounds. Industrial hygienists and other public health professionals need to determine the effectiveness of measures taken to control workers' exposure, and this is generally achieved by making workplace air measurements. This document provides a method for making valid exposure measurements for cadmium. It is of benefit to: agencies concerned with health and safety at work, industrial hygienists and other public health professionals, analytical laboratories, industrial users and workers of metals and metalloids, etc. The execution of its provisions and the interpretation of the results obtained is entrusted to appropriately qualified and experienced people. © ISO 2023 – All rights reserved
Scope: This document specifies a method for the determination of the mass concentration of particulate cadmium and cadmium compounds in workplace air, using either flame or electrothermal atomic absorption spectrometry. The sample digestion procedure specified in 10.2.2 has been validated[2,3] for a selection of cadmium compounds and pigments and glass enamels containing cadmium. The analytical method has been validated[2] for the determination of masses of 10 ng to 600 ng of cadmium per sample using electrothermal atomic absorption spectrometry, and 0,15 µg to 96 µg of cadmium per sample using flame atomic absorption spectrometry.[3] The concentration range for cadmium in air for which this procedure is applicable is determined in part by the sampling procedure selected by the user. The method is applicable to personal sampling of the inhalable or respirable fraction of airborne particles, as defined in ISO 7708, and to stationary sampling.