ISO 11274-2019 PDF

ISO 11274-2019 PDF

Soil quality-Determination of the water-retention characteristic-Laboratory methods

$60.00 $120.00 -50%
Product Code: ISO 11274
Stock In Stock
Edition: 2ND
Published: 09/2019
Number of Pages: 30
File Size: 1 file, 1 Byte

Available Options

Product Description

Soil Quality - Determination of the Water-Retention Characteristics - Laboratory Methods

Introduction: Soil water content and matric pressure are related to each other and determine the water-retention characteristics of a soil. Soil water which is in equilibrium with free water is at zero matric pressure (or suction) and the soil is saturated. As the soil dries, matric pressure decreases (i.e. becomes more negative), and the largest pores empty of water. Progressive decreases in matric pressure will continue to empty finer pores until eventually water is held in only the finest pores. Not only is water removed from soil pores, but the films of water held around soil particles are reduced in thickness. Therefore a decreasing matric pressure is associated with a decreasing soil water content[9][10]. Laboratory or field measurements of these two parameters can be made and the relationship plotted as a curve, called the soil water-retention characteristic. The relationship extends from saturated soil (approximately 0 kPa) to oven-dry soil (about −106 kPa). The soil water-retention characteristic is different for each soil type. The shape and position of the curve relative to the axes depend on soil properties such as texture, density and hysteresis associated with the wetting and drying history. Individual points on the water-retention characteristic may be determined for specific purposes. The results obtained using these methods can be used, for example: — to provide an assessment of the equivalent pore size distribution (e.g. identification of macro- and micropores); — to dete

Scope: This document specifies laboratory methods for determination of the soil water-retention characteristic. This document applies only to measurements of the drying or desorption curve. Four methods are described to cover the complete range of soil water pressures as follows: a) method using sand, kaolin or ceramic suction tables for determination of matric pressures from 0 kPa to −50 kPa; b) method using a porous plate and burette apparatus for determination of matric pressures from 0 kPa to −20 kPa; c) method using a pressurized gas and a pressure plate extractor for determination of matric pressures from −5 kPa to −1 500 kPa; d) method using a pressurized gas and pressure membrane cells for determination of matric pressures from −33 kPa to −1 500 kPa. Guidelines are given to select the most suitable method in a particular case.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 11274-2019 PDF

ISO 11274-2019 PDF

$60.00 $120.00