ISO 11491-2017 PDF

ISO 11491-2017 PDF

Implants for surgery - Determination of impact resistance of ceramic femoral heads for hip joint prostheses

$48.00 $96.00 -50%
Product Code: ISO 11491
Stock In Stock
Edition: 1ST
Published: 07/2017
Number of Pages: 16
File Size: 1 file, 366 Bytes

Available Options

Product Description

Implants for surgery - Determination of impact resistance of ceramic femoral heads for hip joint prostheses

Introduction: Partial and total hip joint prostheses are designed to transmit load and allow movement under high stress conditions. They are intended to replace anatomical structures and to provide function as closely as possible to the attributes of the normal natural joint. Some designs of femoral components of total hip joint prostheses comprise a ceramic femoral head and a metal femoral stem. It is important, therefore, that the ceramic femoral head is of sufficient strength to withstand the static loads as well as the dynamic impact loads likely to be exerted on the prostheses during use. It has been found that the ISO 7206-10 test did not produce the same type of fracture for zirconia heads that were similar to fractures produced clinically, while the test fractures produced on alumina heads were similar to clinical fractures. It is important, specifically in cases of a new ceramic material and/or new taper configurations, to know the behaviour after impact loading such as delayed fracture that may not be detected by a purely static burst test. Hence, this document specifies two alternative test methods to determine the impact strength of ceramic femoral heads. The fracture mechanisms of ceramic ball heads occurring after an impact load may be either an immediate overload breakage or subcritical crack growth. Subcritical crack growth may then lead to failure at forces lower than the initial static burst load. In ceramic ball heads loaded via the interface between the metal trunnion (

Scope: This document specifies two alternative test methods for determining the impact resistance of ceramic femoral heads for hip joint prostheses.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 11491-2017 PDF

ISO 11491-2017 PDF

$48.00 $96.00