ISO 11536-2015 PDF

ISO 11536-2015 PDF

Iron ores - Determination of loss on ignition - Gravimetric method

$48.00 $96.00 -50%
Product Code: ISO 11536
Stock In Stock
Edition: 1ST
Published: 08/01/2015
Number of Pages: 14
File Size: 1 file, 321 Bytes

Available Options

Product Description

Iron ores - Determination of loss on ignition - Gravimetric method

Introduction: The measurement of loss on ignition (LOI) is a technique widely used in the iron ore industry. Ignition loss is the sum of contributions from the mass loss of volatile compounds water vapour, carbon dioxide and sulfides (due to the decomposition of goethite and carbonaceous materials), and the mass gain due to oxidation [Fe(II) to Fe2O3]. Its use is complementary to the determination of elemental or oxide concentrations. It serves to allow for an addition of the oxides, generated at the ignition temperature, and the LOI, to arrive at total (oxide + LOI). The determination of LOI is essential in sinter plant and blast furnace balance calculations, as it is used to calculate calcinated elemental concentrations. © ISO 2015 – All rights reserved

Scope: This International Standard specifies a gravimetric method for the determination of the loss in mass of fully-oxidized iron ores, when ignited at 1 000 °C. This method is applicable to a concentration range of 1,0 % (m/m) to 10,0 % (m/m) loss on ignition in natural iron ores, iron ore concentrates and agglomerates. The method is not applicable to the following: a) Processed ores containing metallic iron (direct reduced iron); b) Natural or processed ores in which the sulfur content is higher than 0,2 % (m/m); c) Natural or processed ores in which the content of partially-oxidized iron is more than 1,0 % (m/m).

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 11536-2015 PDF

ISO 11536-2015 PDF

$48.00 $96.00