ISO 1161-2026 PDF

ISO 1161-2026 PDF

Series 1 freight containers-Corner and intermediate fittings-Specifications

$120.00 $240.00 -50%
Product Code: ISO 1161
Stock In Stock
Edition: 6.
Published: 10/2026
Number of Pages: 28
File Size: 1 file, 2.1 MB

Available Options

Product Description

Series 1 Freight Containers - Corner Fittings - Specification

Introduction: This document on corner fittings represents the collaborative efforts of technical and operational experts from all sectors of the transportation industry. Figure 1 shows the fittings for the top and bottom corners of series 1 freight containers, which provide compatibility in interchange between transportation modes. Care has been taken to limit consideration only to the details of fittings which are vital to this function. This document specifies the size and configuration of corner and intermediate fitting apertures. The faces of the corner and intermediate fittings having apertures for the engagement of handling and securing devices have specified thickness and tolerances as shown in Figures 2 to 4. The minimum thickness of the blank walls is specified, even though they are not involved in the engagement of the handling and securing devices; they can be thicker than the minimum provided that their inner surfaces do not protrude into the corner fitting cavity reserved for the engaging device. The purpose of this document is to define some details of design vital to container interchange in automatic, semi-automatic and conventional systems. The strength and testing requirements specified in this document do not take any account of the stresses, which can result from the practice of end-to-end coupling of containers. NOTE The requirements of this document do not preclude the provision of additional facilities for lifting either from the top or at the base of the freight con

Scope: This document establishes the basic dimensions and the functional and strength requirements of corner and intermediate cast fittings for series 1 freight containers, i.e. containers which conform to ISO 668 and ISO 1496 (all parts), with the exception of air mode containers (see ISO 8323). Recognizing that there are containers which have ratings and dimensions different from ISO Series 1 containers referred to in ISO 668, which can be fitted with corner fitting of the same design as those described in this document, or of another design, special arrangements for certification of any fittings for such containers can be required.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 1161-2026 PDF

ISO 1161-2026 PDF

$120.00 $240.00