ISO 11611-2024 PDF

ISO 11611-2024 PDF

Protective clothing for use in welding and allied processes

$60.00 $120.00 -50%
Product Code: ISO 11611
Stock In Stock
Edition: 3.
Published: 06/2024
Number of Pages: 52
File Size: 1 file, 2 Bytes

Available Options

Product Description

Vêtements de protection utilisés pendant le soudage et les techniques connexes

Introduction: The purpose of this document is to provide minimum performance requirements for clothing for use in welding and allied processes. For complete protection against exposure to heat and flame, it will be necessary to protect the head, face, hands, and/or feet with suitable personal protective equipment (PPE) and in some cases, appropriate respiratory protection might also be considered necessary. Attention is drawn to ISO/TR 2801:2007[2], which sets out guidelines for selection, use, care, and maintenance of protective clothing against heat and flame. Nothing in this document is intended to restrict any jurisdiction, purchaser, or manufacturer from exceeding these minimum requirements. © ISO 2024 – All rights reserved

Scope: This document specifies minimum safety requirements and test methods for protective clothing including hoods, aprons, sleeves, and gaiters that are designed to protect the wearer's body including head (hoods) and feet (gaiters) and that are to be worn during welding and allied processes with comparable risks. For the protection of the wearer’s head and feet, this document is only applicable to hoods and gaiters. This document does not cover requirements for feet, hand, face, and/or eye protectors. This type of protective clothing is intended to protect the wearer against the following hazards: — spatter (small splashes of molten metal) in 2 risk levels, short contact time with flame, radiant heat from an electric arc used for welding and allied processes, — harmful artificial optical radiation (UV-A, UV-B and especially UV-C) in 3 risk levels generated during welding and allied processes and — minimizes the possibility of electrical shock by short-term, accidental contact with live electrical conductors at voltages up to approximately 100 V d. c. in normal conditions of welding. Sweat, soiling, or other contaminants can affect the level of protection provided against short-term accidental contact with live electric conductors at these voltages. The main manual welding processes are exemplified and are classified into process groups according to the maximum effectively emitted total irradiance, which has been determined and evaluated by measurement[15] for these types of welding processes. For adequate overall protection against the risks to which welders are likely to be exposed, personal protective equipment (PPE) covered by other standards should additionally be worn to protect the head, face, hands, and feet. This document is not applicable for laser welding processes (coherent, monochromatic radiation sources). Guidance for the selection of protective clothing for different welding activities is detailed in Annex B.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 11611-2024 PDF

ISO 11611-2024 PDF

$60.00 $120.00