ISO 11810-2015 PDF

ISO 11810-2015 PDF

Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Primary ignition, penetration, flame spread and secondary ignition

$96.50 $193.00 -50%
Product Code: ISO 11810
Stock In Stock
Edition: 2ND
Published: 12/15/2015
Number of Pages: 28
File Size: 1 file, 765 Bytes

Available Options

Product Description

Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Primary ignition, penetration, flame spread and secondary ignition

Introduction: Some laser applications in medicine can require laser-resistant surgical drapes or other patient- protective covers. Surgical drapes or other patient-protective covers are necessary when a sterile procedure is performed and the surrounding area needs to be protected from liquids, secretions and inadvertent laser radiation. While conventional surgical drapes or other patient-protective covers are not necessarily laser-resistant, specifically designed surgical drapes offer the possibility of laser resistance. Laser induced risks include ignition, flammability, melting, penetration, thermal transfer and reflectivity. Textile and non-woven drape materials can have other risks but they can provide a laser barrier. While there are many potential ignition devices present in the operating room (e.g. fibre optic illumination systems, electro-surgical units, hot wire cauteries), this test method addresses only the laser ignition source. This International Standard is intended for use in testing a surgical drape or other patient-protective cover that claims to be laser-resistant. In addition, areas within this product can vary in material composition or design. Depending on the claims being made by the manufacturer or end-user requirements, all areas for which laser resistance is claimed might need to be tested. CO2 lasers can induce the most challenging conditions of all medical lasers. Ignition/flammability tests and penetration tests can reveal more challenging laser wavelengths as w

Scope: This International Standard is applicable to disposable and reusable, as well as woven and non-woven materials used as surgical drapes and other patient-protective covers which claim to be laser-resistant. The purpose of this International Standard is to provide a standardized method for testing and classifying surgical drapes and other patient-protective covers with respect to laser-induced hazards. An appropriate classification system is given. It is not the purpose of this International Standard to serve as a general fire safety specification, and as such, this International Standard does not cover other sources of ignition. All materials reflect portions of the beam and it is necessary for the user to decide whether specular reflectance can be a hazard. This measurement, however, is not covered in this International Standard. The test procedure can be used to assess the laser induced flammability properties of non-laser- resistant items NOTE Users of products tested by this method are cautioned that the laser resistance of a surgical drape and/or patient-protective cover will be wavelength sensitive and that a surgical drape and/or patient-protective cover are better tested at the wavelength for which it is intended to be used. If tested using other wavelengths, it is necessary to explicitly state the power settings and modes of delivery.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 11810-2015 PDF

ISO 11810-2015 PDF

$96.50 $193.00