Soil quality — Determination of selected explosives and related compounds — Part 3: Method using liquid chromatography-tandem mass spectrometry (LC-MS/MS)
Introduction: Currently two ISO standards exist for the analysis of explosives and related compounds in soil: ISO 11916-1 (HPLC with UV detection method), ISO 11916-2 (GC-ECD or MS). According to the results of inter-laboratory trial with ISO 11916-1, it showed some problematic aspects to analyze PETN, 1,3,5‑TNB and tetryl. In case of ISO 11916-2, it also gave poor inter-laboratory trial results for 1,3,5‑TNB. Therefore, it is necessary to develop new method effectively applicable to the determination of PETN, 1,3,5-TNB and tetryl. In addition to this, lower risk-based PRGs (Preliminary Remediation Goal), new regulatory concerns, and change of land use have created the atmosphere to apply more sensitive and selective instruments to determine explosive and related compounds. From the view of these aspects, liquid chromatography–tandem mass spectrometry (LC-MS/MS) is one of alternative methods for these purposes. LC-MS/MS method provides 10-20 times or more lower detection limit than that of HPLC/UV method. In this document, LC-MS/MS method is intended for the trace analysis of explosives and related compounds and applicable to 12 compounds (1,3-DNB, 1,3,5-TNB, 2,4-DNT, 2,6-DNT, 2,4,6-TNT, 4-A- 2,6- DNT, 2-A-4,6-DNT, Tetryl, Hexyl, RDX, HMX, PETN) listed in ISO 11916-1 (soil, HPLC with UV detection method) except for nitrobenzene, 2-nitrotoluene, 3-nitrotoluene and 4-nitrotoluene (see Annex E). In case of nitrobenzene and nitrotoluenes, they have the low sensitivity in LC-MS/MS measurement t
Scope: This document specifies the measurement of explosives and related nitrocompounds (as given in Table 1) in soil and soil materials. This document is intended for the trace analysis of explosives and related compounds by liquid chromatography–tandem mass spectrometry (LC-MS/MS). Generally, LC- MS/MS measurement shows the lower LOQ (limit of quantification) for each compound in Table 1 than using high-performance liquid chromatography (HPLC) with UV-detection (see Annex B and Annex C). Under the conditions specified in this document, concentrations as low as 0,005 mg/kg to 0,014 mg/kg- dry matter can be determined, depending on the substance. Similar compounds, in particular various nitroaromatics, by-products and degradation products of explosive compounds can be analysed using this method provided that the applicability is checked on a case-by-case basis. Table 1 — Explosive and related nitrocompounds for analysis Compound Abbreviation CAS-RN®1 1,3-Dinitrobenzene 1,3-DNB 99-65-0 1,3,5-Trinitrobenzene 1,3,5-TNB 99-35-4 2,4-Dinitrotoluene 2,4-DNT 121-14-2 2,6-Dinitrotoluene 2,6-DNT 606-20-2 2,4,6-Trinitrotoluene 2,4,6-TNT 118-96-7 4-Amino-2,6-dinitrotoluene 4-A-2,6-DNT 19406-51-6 2-Amino-4,6-dinitrotoluene 2-A-4,6-DNT 35572-78-2 N-Methyl-N-2,4,6-tetranitroaniline Tetryl 479-45-8 2,4,6-Trinitro-N-(2,4,6-trinitrophenyl)aniline Hexyl 131-73-7 1,3,5-Trinitrohexahydro-1,3,5-triazine RDX 121-82-4 1,3,5,7-Tetranitro-octahydro-1,3,5,7-tetrazocine HMX 2691-41-0 Pentaerythrityl tetranitrate PETN 78-11-5 CAS Registry Number® (CAS RN®) is a trademark of CAS corporation. This information is given for the convenience of users of this document and does not constitute an endorsement by ISO of the product named. Equivalent products may be used if they can be shown to lead to the same results.