Road vehicles — Interchange of digital information on electrical connections between towing and towed vehicles — Part 4: Diagnostic communication
Introduction: The ISO 11992 series specifies the interchange of digital information between road vehicles with a maximum authorised total mass greater than 3 500 kg, and towed vehicles, including communication between towed vehicles in terms of parameters and requirements of the lower OSI layers (physical and data link layer) of the electrical connection used to connect the electrical and electronic systems. This document is structured according to the Open Systems Interconnection (OSI) Basic Reference Model, in accordance with ISO/IEC 7498-1 and ISO/IEC 10731, which structures communication systems into seven layers. When mapped on this model, the application layer protocol and data link layer framework requirements specified/referenced in the ISO 11992 series are structured according to Figure 1. Figure 1 illustrates a simplified communication framework: — vehicle normal communication framework, — vehicle diagnostic communication framework, — vehicle-specific use case framework, and — vehicle lower-layers framework. The vehicle normal communication framework is composed of ISO 11992-2 and ISO 11992-3. The vehicle diagnostic communication framework is composed of ISO 14229-1, ISO 14229-2, ISO 14229-3 and this document. The vehicle-specific use case framework is composed of this document, ISO 22901-1 or vehicle manufacturer-specific diagnostic data definition. Figure 1 — ISO documents reference according to the OSI model © ISO 2023 – All rights reserved
Scope: This document specifies diagnostic application requirements and OSI-layer related communication profiles to ensure the interchange of digital information between towing and towed vehicles with a maximum authorized total mass greater than 3 500 kg. The conformance and interoperability test plans are not part of this document.