ISO 12130-1-2021 PDF

ISO 12130-1-2021 PDF

Plain bearings-Hydrodynamic plain tilting pad thrust bearings under steady-state conditions-Part 1: Calculation of tilting pad thrust bearings

$96.50 $193.00 -50%
Product Code: ISO 12130-1
Stock In Stock
Edition: 2.
Published: 04/2021
Number of Pages: 32
File Size: 1 file, 2 Bytes

Available Options

Product Description

Plain bearings — Hydrodynamic plain tilting pad thrust bearings under steady-state conditions — Part 1: Calculation of tilting pad thrust bearings

Introduction: The aim of the ISO 12130 series is to achieve designs of plain bearings that are reliable in operation by the application of a calculation method for oil-lubricated hydrodynamic plain bearings with complete separation of the thrust collar and plain bearing surfaces by a film of lubricant. The calculation method described in this document can be used for other gap shapes, e.g. parabolic lubrication clearance gaps, as well as for other types of sliding blocks, e.g. circular sliding blocks, when for these types the numerical solutions of Reynolds equation are present. ISO 12130-2 gives only the characteristic values for the plane wedge-shaped gap; the values are therefore not applicable to tilting pads with axial support. The calculation method serves for designing and optimizing plain thrust bearings e.g. for fans, gear units, pumps, turbines, electric machines, compressors and machine tools. It is limited to steady-state conditions, i.e. load and angular speed of all rotating parts are constant under continuous operating conditions. © ISO 2021 – All rights reserved

Scope: This document specifies a calculation method for oil-lubricated hydrodynamic plain bearings with complete separation of the thrust collar and tilting pad thrust bearing surfaces by a film of lubricant. This document applies to plain thrust bearings with tilting-type sliding blocks (tilting pads), where a wedge-shaped lubrication clearance gap is automatically formed during operation. The ratio of width to length of one pad can be varied in the range B/L = 0,5 to 2. This document is not applicable to heavily loaded tilting pad thrust bearings. NOTE Equivalent calculation procedures exist that enable operating conditions to be estimated and checked against acceptable conditions. The use of them is equally admissible.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 12130-1-2021 PDF

ISO 12130-1-2021 PDF

$96.50 $193.00