ISO 12219-1-2021 PDF

ISO 12219-1-2021 PDF

Interior air of road vehicles-Part 1: Whole vehicle test chamber-Specification and method for the determination of volatile organic compounds in cabin interiors

$113.50 $227.00 -50%
Product Code: ISO 12219-1
Stock In Stock
Edition: 2ND
Published: 08/2021
Number of Pages: 36
File Size: 1 file, 2 Bytes

Available Options

Product Description

Interior air of road vehicles — Part 1: Whole vehicle test chamber — Specification and method for the determination of volatile organic compounds in cabin interiors

Introduction: Volatile organic compounds (VOCs) are widely used in industry and can be emitted by many everyday products and materials. They have attracted attention in recent years because of their impact on indoor air quality. After homes and workplaces, people spend a lot of time in their vehicles. It is important to determine the material emissions of interior parts and to reduce them to an acceptable level, if required. Therefore, it is necessary to obtain comprehensive and reliable information about the types of organic compounds in the interior air of vehicles and also their concentrations. This document outlines a method of measuring the types and levels of VOCs in vehicle cabin air under controlled conditions. It describes requirements for a whole vehicle test chamber and a test protocol. Measurements are carried out according to ISO 16000-6 (VOCs) and ISO 16000-3 (carbonyl compounds). There are several national test methods available for measuring in-vehicle air quality, e.g. References [2] [4]. However, this document requires a fixed heating radiation system whereas the methods of References [2][3] define a fixed temperature programme. Before setting a fixed radiation density for heating the test vehicle, several validation measurements were performed (Reference [1]). ISO 16000-3, ISO 16000-5,[6] ISO 16000-6, ISO 16000-9,[7] ISO 16000-10,[8] ISO 16000-11,[9] ISO 16000-24,[10] ISO 16000-25,[11] as well as ISO 16017-1 and ISO 16017-2[12] also focus on volatile organic compound (VO

Scope: This document specifies the whole vehicle test chamber, the vapour sampling assembly and the operating conditions for the determination of volatile organic compounds (VOCs), and carbonyl compounds in vehicle cabin air. There are three measurements performed: one (for VOCs and carbonyl compounds) during the simulation of ambient conditions (ambient mode) at standard conditions of 23 °C - 25 °C with no air exchange; a second only for the measurement of formaldehyde at elevated temperatures (parking mode); and a third for VOCs and carbonyl compounds simulating driving after the vehicle has been parked in the sun starting at elevated temperatures (driving mode). For the simulation of the mean sun irradiation, a fixed irradiation in the whole vehicle test chamber is employed. The VOC method is valid for measurement of non-polar and slightly polar VOCs in a concentration range of sub-micrograms per cubic metre up to several milligrams per cubic metre. Using the principles specified in this method, some semi-volatile organic compounds (SVOC) can also be analysed. Compatible compounds are those which can be trapped and released from the Tenax TA®1) sorbent tubes described in ISO 16000-6, which includes VOCs ranging in volatility from n-C6 to n-C16. The sampling and analysis procedure for formaldehyde and other carbonyl compounds is performed by collecting air on to cartridges coated with 2,4-dinitrophenylhydrazine (DNPH) and subsequent analysis by high performance liquid chromatography (HPLC) with detection by ultraviolet absorption. Formaldehyde and other carbonyl compounds can be determined in the approximate concentration range 1 µg/m3 to 1 mg/m3. The method is valid for passenger cars, as defined in ECE-TRANS-WP.29/1045. This document gives guidelines for: a) transport and storage of the test vehicles until the start of the test; b) conditioning for the surroundings of the test vehicle and the test vehicle itself as well as the whole vehicle test chamber; c) conditioning of the test vehicle prior to measurements; d) simulation of ambient air conditions (ambient mode); e) formaldehyde sampling at elevated temperatures (parking mode); f) simulation of driving after th

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 12219-1-2021 PDF

ISO 12219-1-2021 PDF

$113.50 $227.00