Interior air of road vehicles - Part 8: Handling and packaging of materials and components for emission testing
Introduction: Volatile and semi-volatile organic compounds (VOCs and SVOCs) are widely used in industry and can be emitted by many everyday products and materials. They have attracted attention in recent years because of their impact on indoor air quality. After homes and workplaces, the other place people spend a lot of time is in their vehicles. Therefore, it is important to determine the material emissions of interior parts of vehicles and to reduce them to an acceptable level. To do so, it is necessary to get comprehensive and reliable information about the types of organic compounds in the indoor air of vehicles and their concentrations. Since contamination of the materials and/or rapid volatilization of emissions can influence the results of the measurements, it is necessary to know these effects to achieve repeatable and accurate test results. This document describes the handing and packaging of materials and components for emission testing. It is intended to be used by producers and testing laboratories in the automotive industry. This document supports the vehicle product development cycle since vehicle interior materials change frequently. Testing methods can specifically define the handling and packaging conditions for the material to be analysed. In these cases, the method is followed as closely as possible. This document can be used as a guide for when the protocol for handling and packaging the samples between part production and testing is not exactly defined. © ISO 2018 – A
Scope: This document specifies the selection, preparation, conditioning, packaging, labelling, transportation and storage for materials and components for, but not limited to, volatile organic compound (VOC) testing, fogging testing and odour testing. It pays special attention to materials sensitive to contamination and/or rapid volatilization of emissions in order to achieve repeatable and accurate test results.