Photography - Digital still cameras - Determination of exposure index, ISO speed ratings, standard output sensitivity, and recommended exposure index
Introduction: The exposure index (EI), ISO speed ratings, standard output sensitivity (SOS) and recommended exposure index (REI) are useful metrics related to the capture of digital images. Standardization assists users and manufacturers in determining the capabilities of Digital Still Cameras (DSCs), in setting DSCs appropriately for the capture conditions, in obtaining well-exposed images, and in communicating exposures and the related DSC characteristics in image files. The exposures produced by a DSC are determined by the exposure time, the lens aperture, the lens transmittance, the lens illumination falloff, the flare light present at the sensor, and the level and spectral distribution of the scene radiances incident on the camera lens. However, it is not typical for users to deal with this degree of complexity when determining and specifying image exposures. To provide a means for simply communicating exposure information, this document specifies an exposure index (EI) that corresponds to the focal plane exposure of a typical mid-tone. It is intended to be used for setting the camera exposure and as a record of the camera exposure in image files. When an image from a DSC is obtained using an insufficient exposure, proper tone reproduction can generally be maintained by increasing the electronic or digital gain, but the image will contain an unacceptable amount of noise. As the exposure is increased, the gain can be decreased, and, therefore, the image noise can normally be reduced to
Scope: This document specifies the method for assigning and reporting ISO speed ratings, ISO speed latitude ratings, standard output sensitivity values, and recommended exposure index values, for digital still cameras. It is applicable to both monochrome and colour digital still cameras.