Thermal insulation for building equipment and industrial installations — Calculation rules
Introduction: Methods relating to conduction are direct mathematical derivations from Fourier’s law of heat conduction, so no significant difference in the formulae used in the member countries exists. For convection and radiation, however, there are no methods in practical use that are mathematically traceable to Newton’s law of cooling or the Stefan-Boltzman law of thermal radiation, without some empirical element. For convection in particular, many different formulae have been developed, based on laboratory data. Different formulae have become popular in different countries, and no exact means are available to select between these formulae. Within the limitations given below, these methods can be applied to most types of industrial, thermal- insulation, heat-transfer problems. a) These methods do not take into account the permeation of air and the transmittance of thermal radiation through transparent media. b) The formulae in these methods require for their solution that some system variables be known, given, assumed or measured. In all cases, the accuracy of the results depends on the accuracy of the input variables. This document contains no guidelines for accurate measurement of any of the variables. However, it does contain guides that have proven satisfactory for estimating some of the variables for many industrial thermal systems. c) When the steady-state calculations are used in a changing thermal environment (process equipment operating year-round, outdoors, for example), it is
Scope: This document gives rules for the calculation of heat-transfer-related properties of building equipment and industrial installations, predominantly under steady-state conditions. This document also gives a simplified approach for the calculation of thermal bridges.