ISO 12492-2025 PDF

ISO 12492-2025 PDF

Rubber, raw-Determination of water content by Karl Fischer method

$71.50 $143.00 -50%
Product Code: ISO 12492
Stock In Stock
Edition: 2.
Published: 06/2025
Number of Pages: 20
File Size: 1 file, 1 Byte

Available Options

Product Description

Rubber, raw — Determination of water content by Karl Fischer method

Introduction: The water content of raw rubber is one of the important characteristics to be determined as a quality control test. Different synthetic rubbers contain varying amounts of water. Water can affect product quality, texture, shelf life, chemical stability and reactivity. A high amount of water can cause processing difficulties. Water contamination is a cause for major concern in a large number of applications. In the rubber industry, water is one of the major damaging contaminants and is often overlooked as a primary cause of component failure. For certain applications in the rubber industry, even a small amount of water can have damaging effects on production. Several methods are available for the determination of water content. A Karl Fischer (KF) coulometric titrator is one of the most accurate methods. Unlike other techniques, it can trace low levels of free, emulsified and dissolved water (which cannot be detected with normal gravimetric methods). The test is capable of measuring water levels as low as 0,01 %. Unlike gravimetric measurements, which are indirect methods that assume that all volatiles removed are water, the Karl Fischer titration is a direct method that is almost specific for water. The method is especially useful for low moisture levels (< 1 %). The new test method can help determine the water content of the raw rubber and rubber compounds in the shortest possible time and can be helpful for quality control in laboratories. Coulometric determination of water

Scope: This document specifies two test methods for the determination of water content of raw rubber and compounded rubber using a coulometric Karl Fischer titration method: — method A uses an evaporator of heating tube type oven; — method B uses an evaporator of vial type oven. It applies to the water content range between 0,01 % and 1 %. In case of dispute, method B is the preferred method.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 12492-2025 PDF

ISO 12492-2025 PDF

$71.50 $143.00