ISO 12828-2-2016 PDF

ISO 12828-2-2016 PDF

Validation methods for fire gas analyses - Part 2: Intralaboratory validation of quantification methods

$113.50 $227.00 -50%
Product Code: ISO 12828-2
Stock In Stock
Edition: 1ST
Published: 12/15/2016
Number of Pages: 42
File Size: 1 file, 1 Byte

Available Options

Product Description

Validation methods for fire gas analyses - Part 2: Intralaboratory validation of quantification methods

Introduction: The reduction of human tenability from fire effluent has long been recognized as a major cause of injury and death in fire. The composition and concentration of the effluent from a large fire are also clearly key factors in determining the potential for harm to the environment. The harmful components of fire effluent can be determined from both large-and small-scale tests of materials and finished products. Equations have been developed for quantifying the effects of the effluent components, for example, to estimate the available safe egress time (ASET). Related documents are also being developed in ISO TC92 SC3 which deal with environmental threats from fire effluent. These advances in fire science and fire safety engineering have led to an increasing demand for quantitative measurements of the chemical components of the fire effluent. Characterizing these measurements is a key factor in evaluating the quality of the quantitative data produced. Such a characterization is developed over four items. Item 1: Define the objective of the analysis. Before undertaking a chemical analysis of fire effluent, the final objective of the analysis should be established. For example, the objective might be part of a fire safety engineering design of a building, validation of a numerical fire model, or determination of the toxic potency of the effluent from a particular combustible item. Item 2: Determine the degree of accuracy and precision required from the analysis. Accuracy is dependent

Scope: This document describes tools and techniques for use in validating the analysis of fire gases when an analytical method is developed in a laboratory. It complements ISO 12828-1, which deals with limits of quantification and detection. The tools and techniques described can be applied to the measurement of quantities, concentrations (molar and mass), volume fractions, and concentration or volume fraction versus time analyses. Fire effluents are often a complex matrix of chemical species, strongly dependent on the materials involved in the fire, but also dependent on fire scenario parameters (see ISO 19706). With such a wide variety of conditions, the analytical techniques available will differ in terms of the influence of the matrix on the methods and on the concentration ranges which can be measured. The analytical techniques available are likely to differ significantly in several respects, such as their sensitivity to the matrix and the range of concentrations/volume fractions which can be reliably measured. For these reasons, a unique reference analytical technique for every fire effluent of interest is, in practical terms, difficult or impossible to achieve. The tools in this document allow verification of the reliable measurement ranges and conditions for the analysis of fire effluents, thereby enabling a comparison among various analytical techniques. Examples of existing International Standards where the information contained in this document can be used are the analytical chemical methods in ISO 19701, ISO 19702, ISO 5660-1, and the chemical measurements in the methods discussed in ISO/TR 16312-2, ISO 16405, or their application to fire toxicity assessment using ISO 13571 and ISO 13344. NOTE 1 The variable “concentration” is used throughout this document, but it can be replaced in all places with “volume fraction” without altering the meaning. This does not apply to the Annexes. NOTE 2 Concentration can be calculated from volume fraction by multiplying by the density of the relevant gas at the relevant temperature and pressure.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 12828-2-2016 PDF

ISO 12828-2-2016 PDF

$113.50 $227.00