ISO 12829-2023 PDF

ISO 12829-2023 PDF

Hydraulic spin-on filters with finite lives-Method for verifying the rated fatigue life and the rated static burst pressure of the pressure-containing envelope

$48.00 $96.00 -50%
Product Code: ISO 12829
Stock In Stock
Edition: 2.
Published: 11/2023
Number of Pages: 18
File Size: 1 file, 936 Bytes

Available Options

Product Description

Filtres hydrauliques à visser ayant une durée de vie spécifiée — Méthode de vérification de la durée de vie nominale en fatigue et de la pression statique d’éclatement nominale de l’enveloppe sous pression

Introduction: In hydraulic fluid power systems, power is transmitted and controlled through a liquid under pressure within an enclosed circuit. A basic requirement of hydraulic fluid power components is that they should be capable of adequately containing the pressurized fluid. The pressure to which an individual component can normally be subjected has a relationship with the rated fatigue pressure and minimum burst pressure. This relationship can be estimated and used as a basis of total life expectancy for the component in an individual application. Such an estimate is applied by the user. Factors such as shock, heat, misuse, etc., are to be judged by the user in each application. Selection of a specific pressure and life expectancy for a component in a particular application can be based upon the rated fatigue pressure and burst pressure as described in Figure 1. This finite life pressure rating test procedure differs from the (NFPA)T2.6.1 R2 infinite life pressure rating document (which is referred to in ISO/TR 10771-2) and can be visualized from the S-N diagram in Figure 1. (NFPA) T2.6.1 R2 is a rating system along the vertical axis, with its fatigue strength distribution and assurance level in the vertical direction at a defined life. The finite life method described in this document is a rating system along the horizontal axis, with its fatigue life distribution and assurance level in the horizontal direction at a defined stress (pressure). Key cycles applied pressure pressure verif

Scope: This document specifies methods for verifying the rated fatigue life and the rated static burst pressure of the pressure-containing envelope (i.e. the filter housing) of a spin-on hydraulic filter with a disposable filter element and a finite life.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 12829-2023 PDF

ISO 12829-2023 PDF

$48.00 $96.00