Analyse par microfaisceaux - Diffraction d’électrons rétrodiffusés - Mesurage de la taille moyenne des grains
Introduction: The mechanical and electromagnetic properties of engineering materials are strongly influenced by their crystal grain size and distribution. For example, strength, toughness and hardness are all important engineering properties that are strongly influenced by these parameters. Both bulk materials and thin films, even as narrow two-dimensional structures, are influenced by grain size. For this reason, it is important to have standard methods for its measurement with commonly used and agreed terminology. This document describes procedures for measuring average grain size from maps of local orientation measurements using electron backscatter diffraction. © ISO 2020 – All rights reserved
Scope: This document describes procedures for measuring average grain size derived from a two-dimensional polished cross-section using electron backscatter diffraction (EBSD). This requires the measurement of orientation, misorientation and pattern quality factor as a function of position in the crystalline specimen[1]. The measurements in this document are made on two dimensional sections. The reader should note carefully the definitions used (3.3) which draw a distinction between the measured sectional grain sizes, and the mean grain size which can be derived from them that relates to the three dimensional grain size. NOTE 1 While conventional methods for grain size determination using optical microscopy are well- established, EBSD methods offer a number of advantages over these techniques, including increased spatial resolution and quantitative description of the orientation of the grains. NOTE 2 The method also lends itself to the measurement of the grain size of complex materials, for example those with a significant duplex content. NOTE 3 The reader is warned to interpret the results with care when attempting to investigate specimens with high levels of deformation.