ISO 13100-2024 PDF

ISO 13100-2024 PDF

Methods for zeta potential determination-Streaming potential and streaming current methods for porous materials

$113.50 $227.00 -50%
Product Code: ISO 13100
Stock In Stock
Edition: 1.
Published: 03/2024
Number of Pages: 36
File Size: 1 file, 2 Bytes

Available Options

Product Description

Methods for zeta potential determination — Streaming potential and streaming current methods for porous materials

Introduction: There are several different types of porous materials, such as porous monoliths, porous particles, deposits of solid particles, etc. Each of these different types can require a special sample handling system. This document covers only those aspects of the measurement and interpretation of electrokinetic and electroacoustic phenomena that are common for all these types of porous materials. The determination of the zeta potential in wetted porous materials is complicated by the fact that this parameter is not a directly measurable quantity. It is calculated from the measured electric signal (either current or potential) that is generated in the wetted porous material by the liquid moving under the influence of an applied pressure gradient. The theories used in the calculation will not be discussed in detail. There are a number of situations where electrokinetic and electroacoustic measurements, without further interpretation, provide extremely useful and unequivocal information for technological purposes. The most important of these situations are: a) identification of the isoelectric point by titration of the zeta potential against a potential determining ion (e.g. pH titration); b) identification of the isoelectric point by titration with other reagents such as surfactants or polyelectrolytes; c) identification of a saturation plateau in the adsorption indicating optimum dosage for a dispersing agent; d) relative comparison of various porous materials with regard to their ele

Scope: This document specifies methods for the zeta potential determination in porous materials that are saturated with a liquid where the pores are readily accessible. There is no restriction on the value of the zeta potential or on the porosity of the porous material. A pore is assumed to be on the scale of hundreds of micrometres or smaller without any restriction on pore geometry. This document covers the applications of alternating current (AC) and direct current (DC) methods using aqueous media as wetting liquids. This document is restricted to linear electrokinetic effects.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 13100-2024 PDF

ISO 13100-2024 PDF

$113.50 $227.00