Reciprocating Internal Combustion Engines - Test Code for the Measurement of Structure-Borne Noise Emitted From High-Speed and Medium-Speed Reciprocating Internal Combustion Engines Measured at the Engine Feet
Introduction: Noise in buildings, structures, ships, aircraft and land vehicles often arises from the use of internal combustion engines, particularly reciprocating engines, and there can be situations where these are the dominant noise source. Even where it is not dominant, it can form an unwelcome background noise. These noises, arising within the building, etc., can be transmitted in at least two ways as given below. a) Directly into the surrounding air. This is called airborne sound and the ISO 6798 series specifies methods for determining the airborne noise output of internal combustion engines. b) Through excitation or vibration in the supporting structure, pipes and shafts. These vibrations then pass through the structure as structural vibration, exciting in turn the walls and panels of the structure, resulting in the radiation of so-called secondary sound or structure-borne noise. The ability of the source of vibration (the engine) to generate vibration in the structure in which it is mounted depends on the amount of motion of the engine at its mounting points, the properties of the engine mounting system and the mobility of the receiving structure. Vibration from the engine feet can be in the vertical orientation, which is the one most easily visualised, but can also be longitudinal or transverse with respect to the crankshaft axis. The vibration source can also cause rotational input, resolved about each of the three orthogonal axes. The passage through the structure of any vibra
Scope: This document specifies the procedure for measuring the capacity of a high-speed or medium-speed engine to generate vibration and the determination of the frequency limits of validity of the information quoted. The method described in this document is not suitable for low-speed engines. This document describes an engineering and not a precision method. Whether the tests are carried out on the test bed or on site will be agreed between the user and the manufacturer. This document is applicable to high-speed and medium-speed reciprocating internal combustion engines for land, rail traction and marine use; this document is not applicable to engines used to propel agricultural tractors, road vehicles and aircraft. This document can also be applied to engines used to propel road- construction and earth-moving machines, industrial trucks and for other applications with engines where no suitable International Standard exists.