Bouteilles à gaz — Gaz et mélanges de gaz — Détermination de la corrosivité sur les tissus pour le choix des raccords de sortie de robinets
Introduction: ISO 5145 specifies the dimensions of different valve outlets for different compatible gas groups. These compatible gas groups are determined according to practical criteria defined in ISO 14456. These criteria are based on certain physical, chemical, toxic and corrosive properties of the gases. In particular, the gas corrosiveness is considered in this document. The aim of this document is to assign a classification category for each gas that takes into account the tissue corrosiveness of the gas for skin, eyes and the respiratory tract as well as the potential for a corrosiveness related acid/base chemical reaction. For gas mixtures containing corrosive components, a calculation method based on the additivity method of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS)[3] is proposed. However, for gas mixtures containing corrosive gas components, some valve outlets standards require the use of the corrosive category regardless of the corrosive gas concentration. © ISO 2022 – All rights reserved
Scope: This document specifies the following, in order to determine the corrosiveness of gases and gas mixtures so that a suitable outlet connection can be assigned to each of them: — for pure gases and some liquids, a complete list indicating their corrosiveness; — for gas mixtures, a calculation method, in the absence of experimental data, relating to the corrosiveness of each of their components.