ISO 13373-9-2026 PDF

ISO 13373-9-2026 PDF

Condition monitoring and diagnostics of machines-Vibration condition monitoring-Part 9: Diagnostic techniques for electric motors

$96.50 $193.00 -50%
Product Code: ISO 13373-9
Stock In Stock
Edition: 2.
Published: 08/2026
Number of Pages: 30
File Size: 1 file, 3.7 MB

Available Options

Product Description

Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 9: Diagnostic techniques for electric motors

Introduction: This document has been developed as a guideline for the procedures to be considered when carrying out vibration diagnostics of electric motors. It is intended to be used by vibration practitioners, engineers and technicians and provides them with useful diagnostic tools. These tools include the use of diagnostic flowcharts, process tables and fault tables. The material contained in this document presents the most basic, logical and intelligent steps that should be taken when diagnosing problems associated with these types of machines. The ISO 10816 series and ISO 20816 series contain acceptable vibration levels and zones for various types and sizes of machines, ranging from new and well-running to those that are in danger of failing. ISO 13373-1 presents the basic procedures for carrying out vibration narrow-band signal analysis. It includes the types of transducers used, their ranges and their recommended locations on various types of machines, online and periodic vibration monitoring systems and the detection of potential machine problems. ISO 13373-2 includes descriptions of the signal conditioning equipment that is required, time and frequency domain techniques and the waveforms and signatures that represent the most common machines operating phenomena or machine faults that are encountered when performing vibration signature analysis. ISO 13373-3 sets out some procedures to determine the causes of vibration problems common to all types of rotating machines. It includes s

Scope: This document specifies the procedures to be considered when carrying out vibration diagnostics of various types of electric motors. The four motor types covered by this document are a) squirrel-cage induction, b) wound-rotor induction, c) salient-pole, and d) DC. NOTE Motor types a) and b) are defined in ISO 20958. This document is mostly applicable to motors with power above 15 kW. This document is intended to be used by condition monitoring practitioners, engineers and technicians and provides a practical step-by-step vibration-based approach to fault diagnosis. In addition, it gives several examples for a range of machine and component types and their associated fault symptoms. The procedures presented in this document can, in some cases, be applied to other types of electrical machines, such as generators, but there can be other specific techniques associated with such machines that are not included in this document. The use of non-vibration quantities, such as voltage and current, to identify and analyse vibration-related faults in electric motors is outside the scope of this document.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 13373-9-2026 PDF

ISO 13373-9-2026 PDF

$96.50 $193.00