Geotextiles and geotextile-related products Screening test method for determining the resistance to oxidation
Introduction: In many civil engineering applications, geotextiles and geotextile-related products can come into contact with water or aqueous solutions present in the soil environment. At the same time, in specific parts of the construction, they can be exposed to oxygen, giving rise to oxidative degradation processes. These processes are usually very slow. Polyolefin materials, such as polypropylene (PP) and polyethylene (PE), are inherently more sensitive to oxidation than those based on polyethylene terephthalate (PET). Other polymers, such as poly(vinyl alcohol) (PVAL according to ISO 1043-1), are also sensitive to oxidation in specific conditions (aqueous media with oxidizing agent). This behaviour can be improved very effectively by the use of appropriate stabilizing additives. It is the purpose of this document to provide a method for screening the resistance to oxidation of geotextiles and geotextile-related products in service for 25, 50 and 100 years. In order to achieve the sufficiently short exposure times needed for screening tests, the oxidative degradation process is accelerated. This acceleration can be achieved either by raising the temperature or by increasing the concentration of the active reaction partner. Raising the temperature can lead to the oxidation rate being limited by oxygen diffusion, thus invalidating the acceleration. This applies particularly to materials with a low surface-to-volume ratio and less to nonwovens made from fine fibres. Two methods are theref
Scope: This document specifies a screening test method for determining the resistance of geotextiles and geotextile-related products to oxidation. The test is applicable to products as follows: — Method A for material consisting solely in polypropylene (PP), polyethylene (PE), polyamide (PA), aramide (AR); — Method B for material consisting solely in polyvinyl alcohol (PVAL). The data are suitable for screening purposes but not for deriving performance data such as lifetime, unless supported by further evidence.