Petroleum and natural gas industries — Completion fluids and materials — Part 3: Testing of heavy brines
Introduction: Crystallization temperature is an important property of well construction and intervention fluids used in cold weather conditions and/or under high pressure. API RP 13J, 5th edition (2014) defines the crystallization temperature of a brine as the temperature at which crystals will appear in a brine solution of a given density as it cools. The definition of the crystallization temperature of a brine provided by API RP 13J, 5th edition (2014) is not suitable for formate brines because of prominent supercooling and metastable phase potassium formate crystals that can form at temperatures much lower than crystallization temperature for stable potassium formate crystals. Formate brines, especially potassium and cesium formate brines and their blends, behave very differently from most other brines due to strong kinetic effects that complicate crystallization temperature measurements. The following factors complicate crystallization temperature measurements in formate brines: — crystallization temperatures can be very low and can be lower than the cooling capability of the measuring equipment; — a significant amount of supercooling; — existence of metastable potassium formate crystals that form in potassium-rich formate brines. API RP 13J, 5th edition (2014) recommends measuring pH of a concentrated brine on a neat sample, despite multiple reasons indicating this approach is wrong, including Debye-Hückel and pH buffers (standards) formulas being well outside of its validity range. T
Scope: This document covers the physical properties, potential contaminants and test procedures for heavy brine fluids manufactured for use in oil and gas well drilling, completion, and workover fluids. This document supplements API RP 13J, 5th edition (2014), the requirements of which are applicable with the exceptions specified in this document. This document provides more suitable method descriptions for determining the formate brines pH, carbonate/bicarbonate concentrations and crystallization temperature at ambient pressure compared to the methods provided by API RP 13J, 5th edition (2014). This document is intended for the use of manufacturers, service companies and end-users of heavy brines.