Optique et photonique - Lasers et équipements associés aux lasers - Méthodes d'essai de distribution de la densité de puissance (d'énergie) du faisceau laser
Introduction: Many applications of lasers involve using the near-field as well as the far-field irradiance (fluence) distribution of the beam. The irradiance (fluence) distribution of a laser beam is characterized by the spatial distribution of radiant power density (radiant energy fluence) with lateral displacement in a particular plane perpendicular to the direction of propagation. In general, the irradiance (fluence) distribution of the beam changes along the direction of propagation. Depending on the radiant power (energy), size, wavelength, polarization, and coherence of the beam, different methods of measurement are applicable in different situations. Five methods are commonly used: camera arrays (1D and 2D), apertures, pinholes, slits, and knife edges. According to ISO 11145, it is possible to use two different definitions for describing and measuring the laser beam diameter. One definition is based on the measurement of the encircled radiant power (energy); the other is based on determining the spatial moments of the irradiance (fluence) distribution of the laser beam. The use of spatial moments is necessary for calculating the beam propagation factor, K, and the beam propagation ratio, M2, from measurements of the beam widths at different distances along the propagation axis. ISO 11146-1 and ISO 11146-2 describe this measurement procedure. For other applications, other definitions for the beam diameter can be used. For some quantities used in this document the beam width based on
Scope: This document specifies methods by which the measurement of irradiance (fluence) distribution is made and specifies parameters for the characterization of the spatial properties of laser irradiance (fluence) distribution functions at a given plane. The methods given in this document are intended to be used for the testing and characterization of both continuous wave (cw) and pulsed laser beams used in optics and optical instruments. This document provides definitions of terms and symbols to be used in referring to irradiance distribution, as well as requirements for its measurement. For pulsed lasers, the distribution of time-integrated irradiance (i.e. radiant exposure) is the quantity most often measured.