ISO 13726-2026 PDF

ISO 13726-2026 PDF

Hydraulic fluid power-Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm-Accessory mounting dimensions

$60.00 $120.00 -50%
Product Code: ISO 13726
Stock In Stock
Edition: 3.
Published: 03/2026
Number of Pages: 16
File Size: 1 file, 530 KB

Available Options

Product Description

Transmissions hydrauliques - Vérins à simple tige, série compacte 16 MPa (160 bar) d'alésages 250 mm à 500 mm - Dimensions d'interchangeabilité des accessoires

Introduction: In hydraulic fluid power systems, power is transmitted and controlled through a liquid under pressure within an enclosed circuit. One component of such systems is the fluid power cylinder. This device converts hydraulic power into linear mechanical force and motion. It consists of a movable element, i.e. a piston and piston rod, operating within a cylindrical bore. © ISO 2026 – All rights reserved

Scope: This document specifies the mounting dimensions of the accessories regarding interchangeability for 16 MPa (160 bar) compact cylinders conforming to ISO 6020-3. The accessories are applied to mounting with cylinders manufactured in accordance with ISO 6020-3. This document covers the following accessories of which the identification code is specified in ISO 6099: AP2 rod clevis, internal thread (see Figure 1 and Table 1); AP4 rod eye, plain, internal thread (see Figure 2 and Table 2); AA4 - L pivot pin (locking plate) (see Figure 3 and Table 3); AL6 locking plate for pivot pin (see Figure 4 and Table 4); AA4 - S and AA4 - R pivot pin plain (see Figure 5-6 and Table 5 respectively). The design of these accessories is based on the maximum forces derived from pressures and bore diameters of the cylinders specified in ISO 2944 and ISO 3320.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 13726-2026 PDF

ISO 13726-2026 PDF

$60.00 $120.00