Thermal performance of building components - Dynamic thermal characteristics - Calculation methods
Introduction: This document is part of a series aimed at the international harmonization of the methodology for assessing the energy performance of buildings. Throughout, this series is referred to as a “set of EPB standards”. All EPB standards follow specific rules to ensure overall consistency, unambiguity and transparency. All EPB standards provide a certain flexibility with regard to the methods, the required input data and references to other EPB standards, by the introduction of a normative template in Annex A and Annex B with informative default choices. For the correct use of this document, a normative template is given in Annex A to specify these choices. Informative default choices are provided in Annex B. The main target groups for this document are architects, engineers and regulators. Use by or for regulators: In case the document is used in the context of national or regional legal requirements, mandatory choices may be given at national or regional level for such specific applications. These choices (either the informative default choices from Annex B or choices adapted to national/regional needs, but in any case following the template of Annex A) can be made available as national annex or as separate (e.g. legal) document (national data sheet). NOTE 1 So in this case: — the regulators will specify the choices; — the individual user will apply the document to assess the energy performance of a building, and thereby use the choices made by the regulators. Topics addressed in
Scope: This document specifies the characteristics related to the dynamic thermal behaviour of a complete building component and provides methods for their calculation. It also specifies the information on building materials required for the use of the building component. Since the characteristics depend on the way materials are combined to form building components, this document is not applicable to building materials or to unfinished building components. The definitions given in this document are applicable to any building component. A simplified calculation method is provided for plane components consisting of plane layers of substantially homogeneous building materials. Annex C provides simpler methods for the estimation of the heat capacities in some limited cases. These methods are suitable for the determination of dynamic thermal properties required for the estimation of energy consumption. These approximations are not appropriate, however, for product characterization. NOTE Table 1 in the Introduction shows the relative position of this document within the set of EPB standards in the context of the modular structure as set out in ISO 52000-1.