ISO 13975-2019 PDF

ISO 13975-2019 PDF

Plastics-Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems-Method by measurement of biogas production

$71.50 $143.00 -50%
Product Code: ISO 13975
Stock In Stock
Edition: 2ND
Published: 04/2019
Number of Pages: 20
File Size: 1 file, 1 Byte

Available Options

Product Description

Plastics — Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems — Method by measurement of biogas production

Introduction: Biological recycling (biorecycling), together with mechanical recycling and chemical recycling, is a viable option for the recovery of plastic waste. This document specifies a method of evaluating the anaerobic biodegradability of such waste in a controlled anaerobic slurry system. This is a representative anaerobic digestion test method and system for biodegradable plastic waste. The production of a biogas is observed under anaerobic conditions suitable for the growth of thermophilic or mesophilic microorganisms. The biogas is collected in a bag under atmospheric pressure, and the biogas volume is measured with a syringe or a gas burette. The biodegradability of the test material is evaluated from the sum of the amount of carbon dioxide dissolved in the supernatant and the cumulative quantity of evolved biogas. This document describes a biodegradation test method for plastic materials in a controlled anaerobic slurry system. It differs from ISO 15985 which uses high- solids anaerobic digestion conditions, and ISO 14853 which uses an aqueous system in an anaerobic environment. © ISO 2019 – All rights reserved

Scope: This document specifies a method of evaluating the ultimate anaerobic biodegradability of plastic materials in a controlled anaerobic slurry digestion system with a solids concentration not exceeding 15 %, which is often found for the treatment of sewage sludge, livestock faeces or garbage. The test method is designed to yield a percentage and rate of conversion of the organic carbon in the test materials to carbon dioxide and methane produced as biogas. The method applies to the following materials, provided they have a known carbon content: — natural and/or synthetic polymers, copolymers or mixtures; — plastic materials that contain additives such as plasticizers, colorants, or other compounds; — water-soluble polymers. It does not apply to materials which exhibit inhibitory effects on the test microorganisms at the concentration chosen for the test. NOTE Inhibitory effects can be determined by an inhibition test (e.g. ISO 13641-1 or ISO 13641-2).

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 13975-2019 PDF

ISO 13975-2019 PDF

$71.50 $143.00