ISO 14085-1-2015 PDF

ISO 14085-1-2015 PDF

Aerospace series - Hydraulic filter elements - Test methods - Part 1: Test sequence

$31.50 $63.00 -50%
Product Code: ISO 14085-1
Stock In Stock
Edition: 1ST
Published: 03/01/2015
Number of Pages: 14
File Size: 1 file, 222 Bytes

Available Options

Product Description

Aerospace series - Hydraulic filter elements - Test methods - Part 1: Test sequence

Introduction: In aerospace hydraulic fluid power systems, power is transmitted and controlled through a liquid under pressure. The liquid is both a lubricant and power-transmitting medium. The presence of solid contaminant particles in the liquid interferes with the ability of the hydraulic fluid to lubricate and causes wear and malfunction of the components. The extent of contamination in the fluid has a direct bearing in the performance, reliability, and safety of the system, and needs to be controlled to levels that are considered appropriate for the system concerned. Filters are used to control the contamination level of the fluid by removing solid contaminant particles, typically consisting of a filter element enclosed in a filter housing. The filter element is the porous device that performs the actual process of filtration. The complete assembly is designated as a filter. Filter element performance is measured by testing, and a series of International Standards have been developed to quantify performance under specified conditions (see Clause 2). To provide a greater level of assurance for a filter element’s fitness for duty, a verification test program is intended to be based on most of these International Standards. This test sequence has been developed to fulfill that requirement. The purpose of this part of ISO 14085 is to define a sequence of testing and provide guidelines for acceptance criteria. © ISO 2015 – All rights reserved

Scope: This part of ISO 14085 specifies a test sequence for evaluation of characteristics of the hydraulic fluid filter elements under standard conditions. This part of ISO 14085 is not intended to qualify a filter element under replicate conditions of service; this can only be done by a specific test protocol developed for the purpose, including actual conditions of use, for example the operating fluid or contamination. The tests data resulting from application of this part of ISO 14085 can be used to compare the performance of aerospace hydraulic filter elements.

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 14085-1-2015 PDF

ISO 14085-1-2015 PDF

$31.50 $63.00