ISO 14644-13-2026 PDF

ISO 14644-13-2026 PDF

Cleanrooms and associated controlled environments-Part 13: Cleaning of surfaces to achieve defined levels of cleanliness in terms of particle and chemical concentration

$113.50 $227.00 -50%
Product Code: ISO 14644-13
Stock In Stock
Edition: 2.
Published: 02/2026
Number of Pages: 40
File Size: 1 file, 2.4 MB

Available Options

Product Description

Cleanrooms and associated controlled environments — Part 13: Cleaning of surfaces to achieve defined levels of cleanliness in terms of particle and chemical concentration

Introduction: The term surface refers to the interface between two phases. For the purpose of this document, the surface is a solid. A “clean surface” is where one or more of the contamination categories (particles, chemical) are under control due to cleaning/decontamination. The degree of cleanliness is specified in the corresponding surface cleanliness levels (see ISO 14644-9 and ISO 14644-10). Different cleaning methods are necessary depending on the degree of cleanliness (cleanliness level) required. This document gives guidance on the selection of cleaning methods to achieve specified cleanliness levels. For the selection procedure, the aspects of surface description, cleanliness specifications, types of contamination, cleaning techniques, material compatibility, and assessment methodology are taken into consideration. Most of the methods are suitable for removal of more than one contamination category at the same time; therefore, a common standard for the selection of a cleaning method for both particles, as well as chemical contamination, is needed. © ISO 2026 – All rights reserved

Scope: This document gives guidelines for cleaning to a specified degree on cleanroom surfaces, surfaces of equipment in a cleanroom and surfaces of materials in a cleanroom. Under consideration are all surfaces (external or internal) that are of interest. It provides guidance on the assessment of cleaning methods for achieving the required surface cleanliness by particle concentration (SCP) and surface cleanliness by chemical concentration (SCC) levels and which techniques should be considered to achieve these specified levels. The appropriateness of cleaning techniques will make reference to the cleanliness levels and associated test methods found in ISO 14644-9 and ISO 14644-10. The document gives general guidance on the following: — expected surface cleanliness levels; — suitability of cleaning methods; — compatibility of surfaces with the cleaning technique; — assessment of cleaning appropriateness. The following are excluded from this document: — classification of cleaning methods; — product produced within a cleanroom; — specific surface-related cleaning methods; — detailed description of cleaning mechanisms, methods and procedures of various cleaning methods; — detailed material characteristics; — description of damage mechanisms by cleaning processes and time-dependent effects; — references to interactive bonding forces between contaminants and surfaces or generation processes that are usually time-dependent and process-dependent; — other characteristics of particles such as electrostatic charge, ionic charges, etc.; — chemical reactions between molecular contaminants and surfaces; — microbiological aspects of surface cleanliness; — radioactive aspects of contamination; — health and safety considerations; — environmental aspects such as waste disposal, emissions, etc.; © ISO 2026 – All rights reserved ISO 14644-13:2026(en) — selection and use of statistical methods. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (includin

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 14644-13-2026 PDF

ISO 14644-13-2026 PDF

$113.50 $227.00