Geotechnical investigation and testing - Identification, description and classification of rock
Introduction: This document gives details of the procedures to be followed in the identification and description of rocks which are to be used at all stages of ground investigation and geotechnical design. This comprises the description of the rock material and the rock mass characteristics in terms of the bedding and discontinuities. The level of detail in a description will depend on the characteristics of the rock, the size and quality of the rock exposure or sample, and the needs of the particular project. The person carrying out the field identification and description should be suitably qualified, skilled and experienced to make a correct and appropriate description and experienced in the geological materials involved in the investigation. Practice in rock identification and description varies from country to country, in part reflecting significant differences in geological conditions. In addition, the quality of samples available for description varies due to the investigation methods employed, as methods of investigation have been developed in response to the ground conditions present. © ISO 2017 – All rights reserved
Scope: This document specifies the rules for the identification and description of rock material and mass on the basis of mineralogical composition, genetic aspects, structure, grain size, discontinuities and other parameters. It also provides rules for the description of other characteristics as well as for their designation. This document applies to the description of rock for geotechnics and engineering geology in civil engineering. The description is carried out on cores and other samples of rock and on exposures of rock masses. Rock mass classification systems using one or more descriptive parameters to suggest likely rock mass behaviour are beyond the scope of this document (see Bibliography). NOTE Identification and classification of soil for engineering purposes are covered in ISO 14688-1 and ISO 14688-2. Identification and description of materials intermediate between soil and rock are carried out using the procedures in ISO 14688-1, ISO 14688-2 and this document, as appropriate.