Condition monitoring and diagnostics of machine systems — Tribologybased monitoring and diagnostics — Part 1: General requirements and guidelines
Introduction: Tribology and lubricant-based monitoring is a broad field comprising the activities of monitoring, reporting and responding to information obtained from the analysis of lubricating oils, hydraulic fluids and greases. Common terms used to describe this practice are "oil analysis", "lubricant" and "wear debris". Because it also encompasses the analysis of used hydraulic fluids and greases, this document generically refers to the entire practice as "lubricant analysis". Lubricants are used in a wide range of machine types, including stationary industrial equipment and mobile equipment used in transportation, construction and mining. Examples of machine types include gearboxes, pumps, hydraulic systems, turbines, compressors, engines and transmissions. Many different condition types can be analysed and reported in the practice of lubricant and wear debris, including: a) quality and condition of new oil deliveries; b) state of lubricants during storage and dispensing; c) distressed, degraded or non-compliant in-service lubricant properties; d) lubricant contamination; e) wear particle composition and physical characteristics; f) abnormal failure root causes or stressing conditions. The methods of gathering and analysing fluid properties and conditions vary widely and evolve directly from which conditions listed above will be reported. Often instruments and procedures are employed in a laboratory to analyse lubricant samples. Similar instruments can be used remotely in the field or
Scope: This document specifies requirements and guidelines for the analysis of lubricating oils, hydraulic fluids, synthetic fluids and greases. Tests for electrical insulating oils and heat transfer oil are outside the scope of this document.