ISO 15156-1-2020 PDF

ISO 15156-1-2020 PDF

Petroleum and natural gas industries-Materials for use in H₂Scontaining environments in oil and gas production-Part 1: General principles for selection of cracking-resistant materials

$48.00 $96.00 -50%
Product Code: ISO 15156-1
Stock In Stock
Edition: 4TH
Published: 11/2020
Number of Pages: 18
File Size: 1 file, 982 Bytes

Available Options

Product Description

Petroleum and natural gas industries — Materials for use in H₂Scontaining environments in oil and gas production — Part 1: General principles for selection of cracking-resistant materials

Introduction: The consequences of sudden failures of metallic oil and gas field components, associated with their exposure to H2S-containing production fluids, led to the preparation of the first edition of NACE MR0175, which was published in 1975 by the National Association of Corrosion Engineers, now known as NACE International. The original and subsequent editions of NACE MR0175 established limits of H2S partial pressure above which precautions against sulfide stress cracking (SSC) were always considered necessary. They also provided guidance for the selection and specification of SSC-resistant materials when the H2S thresholds were exceeded. In more recent editions, NACE MR0175 has also provided application limits for some corrosion-resistant alloys, in terms of environmental composition and pH, temperature, and H2S partial pressures. In separate developments, the European Federation of Corrosion issued EFC Publication 16 in 1995 and EFC Publication 17 in 1996. These documents are generally complementary to those of NACE though they differed in scope and detail. In 2003, the publication of the ISO 15156 series and NACE MR0175/ISO 15156 was completed for the first time. These technically identical documents utilized the above sources to provide requirements and recommendations for materials qualification and selection for application in environments containing wet H2S in oil and gas production systems. They are complemented by NACE TM0177 and NACE TM0284 test methods. The revision of th

Scope: This document describes general principles and gives requirements and recommendations for the selection and qualification of metallic materials for service in equipment used in oil and gas production and in natural-gas sweetening plants in H2S-containing environments, where the failure of such equipment can pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help to avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials requirements given in the appropriate design codes, standards, or regulations. This document addresses all mechanisms of cracking that can be caused by H2S, including sulfide stress cracking, stress corrosion cracking, hydrogen-induced cracking and stepwise cracking, stress-oriented hydrogen-induced cracking, soft zone cracking, and galvanically induced hydrogen stress cracking. Table 1 provides a non-exhaustive list of equipment to which this document is applicable, including exclusions. This document applies to the qualification and selection of materials for equipment designed and constructed using load controlled design methods. For design utilizing strain-based design methods, see Clause 5. This document is not necessarily applicable to equipment used in refining or downstream processes and equipment. INTERNATIONAL STANDARD ISO 15156-1:2020(E) © ISO 2020 – All rights reserved ISO 15156-1:2020(E) Table 1 — List of equipment This document is applicable to materials used for the following equipment Exclusions Drilling, well construction, and well-servicing equipment Equipment exposed only to drilling fluids of controlled compositiona Drill bits Blowout preventer (BOP) shear bladesb Drilling riser systems Work strings Wireline and wireline equipmentc Surface and intermediate casing Wells, including subsurface equipment, gas-lift equipment, wellheads, and christmas trees Sucker rod pumps and sucker rodsd Electric submersible pumps Other artificial lift equipment Slips Flowlines, gathering lines, field facilities, and field processing plants Crude-oil storage and handling facilities operating at a total absolute pressure below 0,45 MPa (6

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 15156-1-2020 PDF

ISO 15156-1-2020 PDF

$48.00 $96.00