ISO 15156-3-2020 PDF

ISO 15156-3-2020 PDF

Petroleum and natural gas industries-Materials for use in H2Scontaining environments in oil and gas production-Part 3: Cracking-resistant CRAs (corrosionresistant alloys) and other alloys

$145.50 $291.00 -50%
Product Code: ISO 15156-3
Stock In Stock
Edition: 4.
Published: 11/2020
Number of Pages: 78
File Size: 1 file, 2 Bytes

Available Options

Product Description

Petroleum and natural gas industries — Materials for use in H2Scontaining environments in oil and gas production — Part 3: Cracking-resistant CRAs (corrosionresistant alloys) and other alloys

Introduction: The consequences of sudden failures of metallic oil and gas field components associated with their exposure to H2S-containing production fluids led to the preparation of the first edition of NACE MR0175 which was published in 1975 by the National Association of Corrosion Engineers, now known as NACE International. The original and subsequent editions of NACE MR0175 established limits of H2S partial pressure above which precautions against sulfide stress cracking (SSC) were always considered necessary. They also provided guidance for the selection and specification of SSC-resistant materials when the H2S thresholds were exceeded. In more recent editions, NACE MR0175 has also provided application limits for some corrosion-resistant alloys in terms of environmental composition and pH, temperature, and H2S partial pressures. In separate developments, the European Federation of Corrosion issued EFC Publication 16 in 1995 and EFC Publication 17 in 1996. These documents are generally complementary to those of NACE, though they differed in scope and detail. In 2003, the publication of the ISO 15156 series and NACE MR0175/ISO 15156 was completed for the first time. These technically identical documents utilized the above sources to provide requirements and recommendations for materials qualification and selection for application in environments containing wet H2S in oil and gas production systems. They are complemented by NACE TM0177 and NACE TM0284 test methods. The revision of this

Scope: This document gives requirements and recommendations for the selection and qualification of CRAs (corrosion-resistant alloys) and other alloys for service in equipment used in oil and natural gas production and natural gas treatment plants in H2S-containing environments whose failure can pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials requirements of the appropriate design codes, standards, or regulations. This document addresses the resistance of these materials to damage that can be caused by sulfide stress cracking (SSC), stress corrosion cracking (SCC), and galvanically induced hydrogen stress cracking (GHSC). This document is concerned only with cracking. Loss of material by general (mass loss) or localized corrosion is not addressed. Table 1 provides a non-exhaustive list of equipment to which this document is applicable, including exclusions. This document applies to the qualification and selection of materials for equipment designed and constructed using load controlled design methods. For design utilizing strain-based design methods, see ISO 15156-1:2020, Clause 5. This document is not necessarily suitable for application to equipment used in refining or downstream processes and equipment. © ISO 2020 – All rights reserved ISO 15156-3:2020(E) Table 1 — List of equipment This document is applicable to materials used for the following equipment Exclusions Drilling, well construction, and well-servicing equipment Equipment exposed only to drilling fluids of con- trolled compositiona Drill bits Blowout-preventer (BOP) shear bladesb Drilling riser systems Work strings Wireline and wireline equipmentc Surface and intermediate casing Wells including subsurface equipment, gas lift equipment, wellheads, and christmas trees Sucker rod pumps and sucker rodsd Electric submersible pumps Other artificial lift equipment Slips Flow-lines, gathering lines, field facilities, and field processing plants Crude oil storage and handling facilities operating at a total absolute pressure below 0,45 MPa (65

Be the first to write a review for this product.

Write a review

Note: HTML is not translated!
Bad           Good
ISO 15156-3-2020 PDF

ISO 15156-3-2020 PDF

$145.50 $291.00